ILAS1206ER600V

ILAS-1206
www.vishay.com
Vishay Dale
Revision: 01-Sep-16
1
Document Number: 34103
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Chip Array Ferrite Beads
MECHANICAL SPECIFICATIONS
Solderability: 90 % coverage after 5 s dip in 235 °C solder
following 60 s preheat at 120 °C to 150 °C and type R flux
dip
Resistance to solder heat: 10 s in 260 °C solder, after
preheat and flux per above
Terminal strength: 1.2 kg (2.64 lbs) minimum for 30 s
Beam strength: 2.0 kg (4.4 lbs) minimum
Flex: 0.079" [2 mm] min. mounted on 0.063" [1.6 mm] thick
PC board
FEATURES
Combines four single 0603 chips into one
package to reduce board space and placement
time
Highly effective in high density applications
0.031" [0.8 mm] terminal pitch makes it easy to apply EMI
prevention in multiple-lines such as connectors and IC
pins
Material and construction design minimize crosstalk
between adjacent circuits
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
ENVIRONMENTAL SPECIFICATIONS
Operating temperature: -55 °C to +125 °C
Thermal shock: 300 cycles, -40 °C to +125 °C
Biased humidity: 85 % RH at 85 °C, 1000 h at full rated
current
STANDARD ELECTRICAL SPECIFICATIONS
Z
± 25 % AT 100 MHz
()
DCR
MAX.
()
RATED
DC CURRENT
(mA)
SIGNAL
SPEED
60 0.25 400
Standard
120 0.30 350
300 0.40 250
600 0.50 200
1000 0.75 150
DIMENSIONS in inches [millimeters]
0.126 ± 0.008
[3.2 ± 0.20]
0.016 ± 0.006
[0.4 ± 0.15]
0.031 ± 0.004
[0.8 ± 0.10]
0.063 ± 0.008
[1.6 ± 0.20]
0.035 ± 0.008
[0.9 ± 0.20]
0.031 typ.
[0.80]
0.120 ± 0.004
[0.30 ± 0.10]
0.031 typ.
[0.80]
0.031 typ.
[0.80]
0.016 typ.
[0.40]
DESCRIPTION
ILAS-1206 120 ± 25 % ER e3
MODEL IMPEDANCE VALUE IMPEDANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
ILAS 1206 ER 121 V
PRODUCT FAMILY SIZE PACKAGE
CODE
IIMPEDANCE
VALUE
IMPEDANCE
TOLERANCE
ILAS-1206
www.vishay.com
Vishay Dale
Revision: 01-Sep-16
2
Document Number: 34103
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CURVES - Frequency Characteristics of R, X, and Z
0
10
20
30
40
50
1 10 100 1000
IMPEDANCE (Ω)
FREQUENCY (MHz)
30 Ω
Z
R
X
0
10
20
30
40
50
60
70
80
90
1 10 100 1000
IMPEDANCE (Ω)
FREQUENCY (MHz)
60 Ω
Z
R
X
0
40
80
120
160
200
1 10 100 1000
IMPEDANCE (Ω)
FREQUENCY (MHz)
120 Ω
Z
R
X
0
50
100
150
200
250
300
350
400
450
1 10 100 1000
IMPEDANCE (Ω)
FREQUENCY (MHz)
300 Ω
Z
R
X
0
100
200
300
400
500
600
700
800
900
1 10 100 1000
IMPEDANCE (Ω)
FREQUENCY (MHz)
600 Ω
Z
R
X
0
200
400
600
800
1000
1200
1400
1 10 100 1000
IMPEDANCE (Ω)
FREQUENCY (MHz)
Z
R
X
1000 Ω
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

ILAS1206ER600V

Mfr. #:
Manufacturer:
Vishay / Dale
Description:
Ferrite Beads ILAS-1206 60 25% ER e3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union