NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE,
USE MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES
OF VERY HIGH CONCERN >1000ppm, AND USE DRC
CONFLICT-FREE SOURCED MATERIALS.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
REVISIONS
REV
DESCRIPTION
DATE
APPV
B
Updated dimensions; Added new title block 2-JUL-12 SAH
RP-SMA MALE CABLE END CRIMP
FOR RG-174 CABLE
CONREVSMA007
C
2-JUL-12
B.MURPHY
Ø0.106
[2.70]
0.650
[16.50]
0.252
[6.40]
SIDE VIEW
0.374
[9.50]
Ø0.154
[3.90]
CRIMP RING
Ø0.197
[5.00]
0.787
[20.00]
HEAT SHRINK
0.254
[6.50]
0.079
[2.00]
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.079
[2.00]
RG-174 Cable
H0.315
[8.00]
1/4-36UNS-2B
THREADS
S.HOGAN
2-JUL-12
Descripon Material Finish
Body
Socket
Insulaon
Nickel
N/A
Gold
PTFE
Gasket RubberSi Rubber
Crimp Ring
Heat Shrink Polyolefin Black
NickelBrass
Brass
Be Cu
3. Solder the socket to the center conductor.
4. Insert the socket, center conductor, and insulator into the body
until the top of the socket is even with the white insulation in the body.
5. Wrap the braid around the tail of the body and crimp the ring with a
0.128" hex crimp tool (or one labeled for use with RG-174 cable).
6. Use heat shrink to cover crimp.
CONREVSMA007 ASSEMBLY INSTRUCTIONS
2. Slip heat shrink and crimp ring onto stripped cable.
1. Strip the cable to the recommended dimensions.
Ø0.024
[0.60]
Ø0.050
[1.28]
Ø0.056
[1.41]
0.248
[6.30]
PIN CHUCK
0.2x2x2 GROOVE
SOCKET
C
Updated dimensions; Updated note 3 3-JUL-18 CLL
