Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief
3500
FKj
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
products
(Black dot)
Frequency correction factor for ripple current
●
Endurance : 105 °C 5000 h
●
High capacitance : 20 to 80 % higher than FK series, large capacitance up to 13000 F
●
Vibration-proof product is available upon request.
●
RoHS compliant
Features
Speci cations
DimensionsMarking
(Unit : mm)
Surface Mount Type
Series : Medium-size FKS Type : V
High temperature
Lead-Free re ow
Category temperature range
–55 °C to +105 °C
Rated voltage range 6.3 V.DC to 35 V.DC
Capacitance range 750 µF to 13000 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I
<
0.01 CV (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC 6.3 10 16 25 35
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 22222
Z(–40 °C)/Z(+20 °C) 33333
Z(–55 °C)/Z(+20 °C) 44433
Endurance
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
tan
d
< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Capacitance change Within ±30 % of the initial value
tan
d
< 200 % of the initial limit
DC leakage current Within the initial limit
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan
d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 6.3 V.DC 3500 µF
Marking color : BLACK
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.75 0.90 0.95 1.00
Size
code
0
D L A, B H I W P K
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
R. Voltage
(V.DC)
6.3 10 16 25 35
Code j ACEV
May. 201700
