HTRN10-1T5

HTRN
www.vishay.com
Vishay Dale Thin Film
Revision: 12-Dec-11
1
Document Number: 60111
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Molded, 50 mil Pitch, High Temperature (215 °C);
Thin Film Surface Mount, Dual-In-Line Resistor Network
HTRN series resistor networks feature four isolated resistors
with standard 50 mil pitch lead spacing. HTRN is ideal to be
used in oil/gas exploration industry, automotive under the
hood applications, and aerospace engine control high
temperature applications. The networks feature close TCR
tracking and tight ratio tolerance and are ideally suited for
unity gain operational amplifier circuitry. The standard
resistance offering listed are available for immediate
delivery.
SCHEMATIC
FEATURES
Ratio tolerance to ± 0.05 %
Ratio stability ± 0.1 %
- 55 °C to 215 °C operating temperature range
0.068" (1.73 mm) maximum seated height
Rugged molded case construction with no
internal solder
Low temperature coefficient (± 25 ppm/°C)
JEDEC MS-012 STD variation AA package
Gold terminations for durable attach bonds
Compliant to RoHS Directive 2002/95/EC
Halogen-free according to IEC 61249-2-21 definition
TYPICAL PERFORMANCE
Note
Consult factory for additional values and schematics
8
R
1
765
1234
R
1
R
2
R
2
ABSOLUTE TRACKING
TCR 25 5
ABSOLUTE RATIO
TOL. 0.1 0.05
STANDARD RESISTANCE OFFERING (R
1
/R
2
)
RATIO R
1
R
2
100:1 100K 1K
50:1 50K 1K
25:1 25K 1K
20:1 20K 1K
10:1 10K 1K
5:1 10K 2K
2:1 10K 5K
4:1 4K 1K
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome -
Pin/Lead Number 8-
Resistance Range 1000 to 100 k per resistor -
TCR: Absolute ± 25 ppm/°C - 55 °C to + 125 °C
TCR: Tracking ± 5 ppm/°C - 55 °C to + 125 °C
Tolerance: Absolute 0.1 % + 25 °C
Tolerance: Ratio 0.05 % + 25 °C
Power Rating: Resistor 100 mW Maximum at + 70 °C
Power Rating: Package 400 mW Maximum at + 70 °C
Stability: Absolute R ± 0.5 % 2000 h at + 215 °C at 25 % rated power
Stability: Ratio R ± 0.1 % 2000 h at + 215 °C at 25 % rated power
Voltage Coefficient 0.1 ppm/V (typical) -
Working Voltage 100 V max. not to exceed -
Operating Temperature Range - 55 °C to + 215 °C -
Storage Temperature Range - 55 °C to + 215 °C -
Noise < - 30 dB -
Thermal EMF 0.08 μV/°C -
Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C
Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C
P x R
HTRN
www.vishay.com
Vishay Dale Thin Film
Revision: 12-Dec-11
2
Document Number: 60111
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Marking - Vishay symbol, part number from ordering information
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION INCHES MILLIMETERS
A 0.157 3.99
B 0.0165 ± 0.0025 0.4 ± 0.06
C 0.050 1.27
D 0.195 max. 4.93
E 0.008 ± 0.001 0.20 ± 0.03
F 0.028 ± 0.001 0.71 ± 0.02
G 0.239 ± 0.005 6.07 ± 0.13
H 0.068 max. 1.73
I 0.008 ± 0.002 0.22 ± 0.06
Ø 2° to 6° 2° to 6°
I
Resistance
Value Code
Seating
Plane
A
B
C
E
H
G
F
ø
D
HTRN
x x x x
Date
Code
MECHANICAL SPECIFICATIONS
Resistive Element Passivated nichrome
Substrate Material Silicon
Body Molded epoxy
Terminals Copper
Termination Finish Plated Ni/Pd/Au
DERATING CURVE
Ambient Temperature °C
0 70 215
Percent of Rated Power
0
25
50
75
100
100 % = 0.40 W
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: HTRN5-1UF
GLOBAL MODEL
(4 digits)
RESISTANCE
(3, 4 or 5 digits)
PACKAGING
HTRN 2-1
4-1
5-1
10-1
20-1
25-1
50-1
100-1
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 3000
TS = 100 min., 1 mult
UF = TUBED
N5 - 1UFRTH
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

HTRN10-1T5

Mfr. #:
Manufacturer:
Vishay
Description:
Resistor Networks & Arrays 10K 1K 0.1% ABS 0.05% RATIO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union