WMS7130 / 7131
- 2 -
1. GENERAL DESCRIPTION
The WMS7130/7131 is a single channel 32-tap non-volatile linear digital potentiometer available in
10KΩ, 50KΩ and 100KΩ resistance. The device consists of Up/Down serial interface, tap register,
decoder, resistor array, wiper switches, NV memory and control logics.
The WMS7130 device can be configured as a two-terminal variable resistor or a three-terminal voltage
divider without an output buffer, but the WMS7131 device, which has a built-in output buffer, can only
be configured as a three-terminal voltage divider. Both devices can be used in a wide variety of
applications.
The output of the potentiometer is determined by its wiper position, which varies linearly between its
end terminals, R
A
/V
A
and R
B
/V
B
. The wiper position, R
w
/V
w,
is controlled by Up/Down serial interface
(
CS , INC and U/D ) through the Tap Register (TR). In addition, the wiper position can also be
stored into a non-volatile memory location (NVMEM0), which is then automatically recalled upon
power up.
2. FEATURES
• Drop-in replacement for many popular parts
• Single linear-taper channel
• 32 taps
• 10K, 50K and 100K end-to-end resistance
• V
SS
to V
DD
terminal voltages
• Automatic recall of wiper position when power-on
• Potentiometer control through Up/Down (3-wire) serial interface
• Endurance 100,000 cycles
• Data retention 100 years
• Package options:
- 8-pin PDIP, SOIC or MSOP
• Industrial temperature range: -40° to 85°C
• Single supply operation : 2.7V to 5.5V
