OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MGJ6T24F24MC-R7

P1-P3P4-P6P7-P9P10-P12
MGJ6 Full Bridge Series
5.7kVDC Isolated 6W Triple Output Gate Drive SM DC/DC Converters
KDC_MGJ6C-FB.A02 Page 10 of 12
www.murata-ps.com/support
APPLICATION NOTES (Countined)
SLIC Circuits
The output configuration shown below could be used for subscriber line interface circuits (SLIC’s), particularly for the Integrated Services Digital Network (ISDN) and also
for standard telecommunications circuits where a local power source is preferred to the telephone system power due to either the power quality of the telecommunications
system power supply or to avoid potential power line disturbances, such as lightning strikes and access switching, which will affect the target circuit function.
Another application area is in fibre-in-the-loop (FITL) or radio-in-the-loop (RITL) interfacing via a standard telecommunication SLIC, where the usual telecommunication bat-
tery voltage is not available due to the transmission media in use (fibre or radio). In particular, FITL/RITL interfaces directly on PC cards, in local monitor and boost circuits
and at exchanges between the fibre/radio and wire media. The supply rails can be used for ringing generators as well as SLIC circuits or where both are combined, such as
in the AMD AM79R79 Ringing SLIC device (see figure 2). The -72V rail is used primarily for the generation of the ringing signal (VBAT1), the -48V rail is used to supply in line
access circuitry (VBAT2) and the -24V supply for the on-chip regulator for the logic interface (VNEG). Alternative devices from other manufacturers could use the -24V output
for their internal circuit supply and -72V for ringing.
DC
DC
+Vin
-Vin
0V
-24V
-48V
-72V
V
BAT1
VBAT2
VNEG
BGND
A
B
TIP
RING
AMD (Am7R79)
DIS/SYNC
MGJ6 Full Bridge Series
5.7kVDC Isolated 6W Triple Output Gate Drive SM DC/DC Converters
KDC_MGJ6C-FB.A02 Page 11 of 12
www.murata-ps.com/support
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS
Pin Function
1 Dis/Sync
2 VHA RTN
3
VHA +24V
4 VHB RTN
5 VHB +24V
6 VL +24V
7 VL RTN
8 -Vin
9 +Vin
RECOMMENDED FOOTPRINT DETAILS
All dimensions in mm (inches), Controlling dimensions is mm.
Tolerance (unless otherwise stated) ±0.25 (0.010).
Component layout is shown for reference only
Weight: 17.3g
1 23
6789
11.05±0.25 [0.435±0.010]
21.59±0.25 [0.850±0.010]
26.62±0.25 [1.048±0.010]
1.17±0.25 [0.046±0.010]
1.52±0.30 [0.060±0.012]
19.56±0.35 [0.770±0.014]
x9 PINS
2.29±0.08 [0.090±0.003]
x9 PINS 1.60±0.05 [0.063±0.002]
41.53±0.15 [1 .635±0.006]
22.61±0.15 [0.890±0.006]
SMA PICKUP POINT
(TOP OF CORE)
13.85±0.50 [0 .545±0.020]
0.10 S
S
SEATING PLANE
14.05±0.50 [0.553±0.020]
x9 PINS
4
5
39.19±0.25 [1.543±0.010]
SMA PICK UP POINT
(15.00 [0.591])
11.05 [0.435]
21.59 [0.850]
x9 PLACES
3.38 [0.133]
x9 PLACES 2.41 [0.095]
RECOMMENDED
ISOLATION BARRIER
26.62 [1.048]
39.19 [1.543]
8.50 [0.335]
8.50 [0.335]
19.56 [0.770]
MGJ6 Full Bridge Series
5.7kVDC Isolated 6W Triple Output Gate Drive SM DC/DC Converters
KDC_MGJ6C-FB.A02 Page 12 of 12
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2017 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the
Life and Safety Critical Application Sales Policy:
Refer to:
http://www.murata-ps.com/requirements/
TAPE & REEL SPECIFICATIONS
REEL OUTLINE DIMENSIONS REEL PACKAGING DETAILS
TAPE OUTLINE DIMENSIONS
DIRECTION OF UNREELING
56.0 [2.205]
4.0 [0.157]
36.0 [1.417]
15.5 [0.610]
26.2 [1.031]
COVER TAPE
52.4 [2.063]
42.0 [1.653]#
23.1 [0.908]#
Product Orientation
Pin 1, located nearest to
carrier drive sprocket.
Reel Quantity: 7” 23 - or 13” - 92
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm(inches) ±0.1mm (±0.004 Inches)
Controlling dimension is mm
Components shall be orientated within the carrier tape as indicated
# Measured on a plane 0.3mm above the bottom pocket
Tape & Reel specifications shall conform with current EIA-481 standard
Unless otherwise stated all dimensions in mm(inches)
Controlling dimension is mm
# Measured at hub
## Six equi-spaced slots on 180mm/7” reel
50.4 [1.984]
MAX #
Ø
13.5
12.8
[
Ø
0.531
0.504
]
1.5 [0.059]
MIN ##
Ø20.2 [Ø0.795]
MIN
Ø330 [13.000]
OR
Ø177.8 [7.000]
100 [3.937]
MIN
LEADER SECTION
400 [15.748] MIN
GOODS
ENCLOSURE
SECTION
TRAILER SECTION
160 [6.299] MIN
P1-P3P4-P6P7-P9P10-P12

MGJ6T24F24MC-R7

Mfr. #:
Buy MGJ6T24F24MC-R7
Manufacturer:
Description:
DC/DC CONVERTER ISOLATED 24/24V 6W, RL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet