C3P0312N-A

195°
C
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
0.25 amp @ 28 VDC; 0.1 amp @ 125 VAC.
Current Carrying Capacity: 6 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 30 milliohms.
Insulation Resistance: In excess of 10,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
C2 - 8 PIN CONSTRUCTION SWITCHES - 30° INDEXING
ADJUSTABLE STOPS SET @ 2 POS. - P.C. TERMINALS
C3 - 12 PIN CONSTRUCTION SWITCHES - 30° INDEXING
ADJUSTABLE STOPS SET @ 2 POS. - P.C. TERMINALS
SPECIFICATIONS AND ORDERING INFORMATION
C2/C3 - SERIES
0.82 / 1.2" WIDE 0.25 AMP @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Terminals and Contacts: Brass with silver plate as standard.
Insulation: Polyester.
Index: Dual-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 60° , and 90° available.
Index Stops: Fixed standard, adjustable, or continuous available.
Stop Strength: 8 in. lbs. minimum.
STANDARD
PART
NUMBER
C
2 -
DIMENSIONS
- 8
PIN
DESIGN
* FIGURES ARE SHOWN ON PAGE 55.
C2P - STANDARD 8–PIN PER DECK ARRANGEMENT
8
UNIT OF ELECTRO SWITCH CORP.
ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
A
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS DECK DECKS SHORTING
*
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS DECK DECKS SHORTING
*
The C2/C3 Series offers an 8 position and a 12 position vertical P.C. board
mountable design. Standard designs utilize a 30° index angle and polyester
insulation.
1/4" DIAMETER SHAFTS ARE AVAILABLE.
CONTACT FACTORY.
01 02-08 1 1 C2P0108S - A C2P0108N - A CD 01 02-12 1 1 C3P0112S - A C3P0112N - A CA
02 02-08 1 2 C2P0208S - A C2P0208N - A CD 02 02-12 1 2 C3P0212S - A C3P0212N - A CA
02 02-04 2 1 C2P0204S - A C2P0204N - A CI 02 02-06 2 1 C3P0206S - A C3P0206N - A CH
03 02-08 1 3 C2P0308S - A C2P0308N - A CD 03 02-04 3 1 C3P0304S - A C3P0304N - A CK
04 02-04 2 2 C2P0404S - A C2P0404N - A CI 03 02-12 1 3 C3P0312S - A C3P0312N - A CA
04 02-08 1 4 C2P0408S - A C2P0408N - A CD 04 02-06 2 2 C3P0406S - A C3P0406N - A CH
05 02-08 1 5 C2P0508S - A C2P0508N - A CD 04 02-12 1 4 C3P0412S - A C3P0412N - A CA
06 02-04 2 3 C2P0604S - A C2P0604N - A CI 06 02-04 3 2 C3P0604S - A C3P0604N - A CK
C
UNIT OF ELECTRO SWITCH CORP.
ELECTRONIC PRODUCTS
ADDITIONAL OPTIONS AND
ORDERING INFORMATION
C2/C3 - SERIES
CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS.
C
3 -
DIMENSIONS
- 12
PIN
DESIGN
C3P - STANDARD 12–PIN PER DECK ARRANGEMENT
SHAFT
AND
FLAT
OPTIONS
9
SHAFT AS VIEWED
WITH NON-TURN LUG
AT 9 O'CLOCK AND
SHAFT IN EXTREME
CCW POSITION AND
STRUT BOLTS
ORIENTED VERTICALLY.
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
PRINTED
CIRCUIT
BOARD
PATTERN
C2 C3
8–PIN DECK 12–PIN DECK
CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS
(SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY)
ADDITIONAL OPTIONS
P
NOTE:
1. ONE DECK EQUALS
TWO WAFERS.
2. ADD .300" FOR EACH ADDITIONAL DECK.
3. 12 FIXED POSITION USES ADJUSTABLE STOP DIMENSIONS.
1/4" DIAMETER SHAFTS ARE AVAILABLE.
CONTACT FACTORY.
2 DIGIT INSULATION TOTAL ACTIVE CONTACT
SERIES TYPE POLES POSITIONS TYPE
TERMINAL INDEX STOP SHAFT/ SHAFT
TYPE ANGLE TYPE BUSHING FLAT
C2 P-POLYESTER 01 - MIN. 08 - MAX @ 30° N- NON
04 - MAX @ 60° SHORTING
03 - MAX @ 90° S- SHORTING
C3 P-POLYESTER 01 - MIN. 12 - MAX @ 30° N- NON
06 - MAX @ 60° SHORTING
04 - MAX @ 90° S - SHORTING
30° F-FIXED
60° C- CONT.
90° A-ADJ.
SEE SEE
CHART CHART
"A" "B"
How to Order Additional Options:
NOTES:
1. The standard spacing for the 1/8” dia. shaft from the first
row of terminals to the mounting surface is .390 in.
2. The standard spacing for the 1/4” dia. shaft from the first
row of terminals to the mounting surface is .481 in.
U
YW
Z

C3P0312N-A

Mfr. #:
Manufacturer:
Electroswitch
Description:
Rotary Switches 3P 12POS 30DEG ADJ NON-SHORTING
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union