7
ESD Sensitivity Level
Human Body Model
(EIA/JESD22-A114B): Class 1A (250Vmin, less than 500V)
Machine Model
(EIA/JESD22-A115A): Class A (50Vmin, less than 200V)
Notes:
ESD Sensitivity level for Human Body Model and Machine Model
necessitate the following
handling precautions:
1. Ensure Faraday cage or conductive shield bag is used during trans-
portation processes.
2. If the static charge at SMT assemble station is above the device
sensitivity level, place an ionizer near to the device for charge neu-
tralization purposes.
3. Personal grounding must be worn at all times when handling the
devices.
Moisture Sensitivity Classication: Class 3
Preconditioning per JESD22-A113-D Class 3 was performed
on all devices prior to reliability testing.
ACPM-7881 is a moisture sensitive component. It’s im-
portant that the parts are handled under precaution and
a proper manner. The handling, baking and out-of-pack
storage conditions of the moisture sensitive components
are described in IPC/JEDC S-STD-033A. Avago Technolo-
gies recommends utilizing the standard precautions listed
below.
1. Calculated Shelf Life in Sealed Bag: 12 months at < 40°C
and < 90% Relative Humidity (RH)
2. Peak Package Body Temperature: 250°C
3. After bag is opened, devices that will be subjected to
reow solder of other high temperature process must
be:
a. Mounted within 168 hours of factory condition ≤
30°C / 60% RH
b. Stored at <10% RH if not used
4. Devices require baking, before mounting if:
a. Humidity indicator card is > 10% when read at 23
± 5°C immediately after moisture barrier bag is
opened.
b. Items 3a or 3b is not met
5. If baking is required, please refer to J-STD-033 standard
for low temperature (40°C) baking requirement in
Tape/Reel form.
Tape Dimensions and Orientation
∅1.55 ±� 0.05
∅�
�
1.50 (MIN)
4.38 ±� 0.10
1.80 ±� 0.10
4.38 ±� 0.10
C
L
8.00 ±� 0.10
4.38 ±� 0.10
2.00 ±� 0.05
[1]
4.00 ±� 0.10
[2]
5.50 ±� 0.05
[3]
12.00 ±� 0.30
1.75 ±� 0.10
0.30 ±� 0.05
Notes:
1. Measured from centerline of sprocket hole to centerline of pocket
2. Cumulative tolerance of 10 sprocket holes is ± 0.2 mm
3. All dimensions in millimeters unless otherwise stated.
Agilent
ACPM-7881
MLYWWDD
XXXX