Product catalogue | Terminals | Tension clamp technology | Modular PE conductor terminals | Standard form | 16 mm²
- 2 -
Additional technical data
Explosion-tested version "Ex e" No
Installation advice TS 35
Insulating material Wemid
Levels cross-connected internally No
No. of identical terminals 1
No. of levels 1
No. of terminal strips per level 2
Open sides right
Operating temperature range - 50 °C, + 120 °C
Product family Z-series
Type of connection Clamped
Type of mounting Snap-on
UL 94 flammability rating of insulation material V-0
Version PE terminal
CSA rating data
Min. cross-section (CSA) AWG 14
Max. cross-section (CSA) AWG 4
Conductors for clamping (additional
connection)
Flexible with ferrule, min. (DIN 46228 pt 1) 1.5 mm²
Flexible with ferrule, max. (DIN 46228 pt 1) 16 mm²
Conductors for clamping (rated connection)
Clamping range, min. 1.5 mm²
Clamping range, max. 25 mm²
Type of connection Tension clamp connection
2nd type of connection clamped
Connection direction top
No. of connections 2
Stripping length 18 mm
Blade size 1.0 x 5.5 mm
Gauge to IEC 60947-1 A7
Solid, min. 1.5 mm²
Solid, max. 16 mm²
Stranded, min. 16 mm²
Stranded, max. 25 mm²
Flexible, min. 1.5 mm²
Flexible, max. 16 mm²
Flexible with ferrule, min. (DIN 46228/1) 1.5 mm²
Flexible with ferrule, max. (DIN 46228/1) 16 mm²
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
1.5 mm²
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
16 mm²
AWG conductor size, min. AWG 14
AWG conductor size, max. AWG 4
AWG conductor size, min. 1.5 mm²
AWG conductor size, max. 21.15 mm²
