ADP010106-01 and ADP010104-01 – Rolled Serial Adapters
The ADP adapters are both used for
rolling the pins of Sun/Cisco pinned
equipment (i.e., like SLC) to be able
to use a standard Cat5/6 cable.
Typical use for the two adapter
lengths in parallel would be when the
ADP adapter needs to be placed at the
device port end of a high port density
console server (i.e., 32 or 48 port
SLC). This will allow for more
tolerance between cables/adapters
without crowding (see illustration and
installation example below).
ADP010104-01 and ADP010106-01 pinout
