ABSOLUTE MAXIMUM RATINGS
Supply voltage V
CC
-0.5V to +6V
Supply voltage V
EE
-6V to +0.5V
Analog inputs to ground V
EE
-0.5V to V
CC
+0.5V
Digital inputs to ground -0.5V to V
CC
+0.5V
Outputs to ground* V
EE
-0.5V to VCC +0.5V
Output current, max continous 40mA
Operating Ambient Temperature Range -40⬚C to 85⬚C Storage -65⬚C to 150⬚C
Operating Junction temperature T
JMAX
150⬚C**
**The thermal resistance from the semiconductor dieto ambient istypically 120⬚C/W when the SO16 package is
mounted on a PCB in free air. The power dissipation of the device when loaded must be designed to keep the
device junction temperature below T
JMAX
.
*During power-up and power-down, these voltage ratings require an appropriate sequence of applying and
removing signals and power supplies.
ZXFV301
ISSUE 2 - NOVEMBER 2002
2
PARAMETER CONDITIONS TEST MIN TYP MAX UNIT
Supply Voltage V+ 4.75 5 5.25 V
Supply Voltage V- -5.25 -5 -4.75 V
Positive supply current P 15 19 22 mA
Negative supply current P 9 14 18 mA
Voltage gain DC P 0.99 1.000 1.01 V/V
Input Common mode Voltage P ⫾3V
Input resistance P 35 45 55 k⍀
Output offset Voltage All channels held at 0V P -10 +10 +30 mV
Input bias current Active channels held at 0V P -25 -11 +5 A
Output Voltage swing P ⫾3V
Output drive current P 40 mA
Output resistance C 1 ⍀
Output resistance Disabled (EN low) P 1.5 3 4.5 M⍀
Positive PSRR P 40 54 dB
Negative PSRR C 30 51 dB
Small signal bandwidth
1
C 300 MHz
Slew rate, 25% to 75% 2V pk-pk C 450 V/s
Logic input HIGH V
Hmin
C2V
Logic input LOW V
Lmax
C 0.8 V
Logic input current I
INHIGH
logic input voltage = 5V C 5 pA
Logic input current I
INLOW
logic input voltage = 0V C -70 A
ELECTRICAL CHARACTERISTICS
⫾5V power supplies, T
amb
= 25⬚C unless otherwise stated. R
L
= 150⍀, C
L
= 10pF
Characteristics apply to channel selected, and EN input HIGH unless otherwise stated
Test level: P = 100% production test
C = characterised only
