ITR20004

ITR20004
Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 7 of 8
Device NoDRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao
█Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
NO. Item Test Conditions Test Hours/
Cycles
Sample
Sizes
Failure
Judgement
Criteria
Ac/Re
1 Solderability
TEMP.230℃±5
5secs 22pcs
More than 90% of
lead to be covered
by soldering
0/1
2 Temperature Cycle
H : +85 30mins
5mins
L : -55 30mins
50Cycles 22pcs 0/1
3 Thermal Shock
H :+100 5mins
10secs
L :-10 5mins
50Cycles 22pcs 0/1
4 High Temperature
Storage
TEMP.+100
1000hrs 22pcs 0/1
5 Low Temperature
Storage
TEMP.-55
1000hrs 22pcs 0/1
6 DC Operating Life I
F
=20mA Vce=5V 1000hrs 22pcs 0/1
7 High Temperature/
High Humidity
85 / 85% R.H
1000hrs 22pcs
I
R
U×2
EeL×0.8
V
F
U×1.2
UUpper
Specification
Limit
LLower
Specification
Limit
0/1
Recommended Method of Storage
The following are general recommendations for moisture sensitive level (MSL) 4 storage
and use:
z Shelf life in sealed bag: 12 months at < 40 °C and < 90% relative humidity (RH)
z After bag is opened, devices that will be subjected to reflow solder or other high temperature
process must
a) Mounted within 72 hours of factory conditions < 30 °C/60%RH, or
b) Stored at <20% RH
z Devices require bake, before mounting, if:
Humidity Indicator Card is > 20% when read at 23 ± 5 °C
z If baking is required, devices may be baked:
a) 192 hours at 40,and <5% RH(dry air/nitrogen) or
b) 96 hours at 60,and <5% RH for all device containers
c) 24 hours at 125 °C
ITR20004
Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 8 of 8
Device NoDRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao
Packing Specifications
1. 100 Pcs/1 Tube
2. 44 Tube /1 Box
3. 6 Box/ 1 Carton
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: None
HUE: None
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http:\\www.everlight.com

ITR20004

Mfr. #:
Manufacturer:
Description:
OPTO INTERRUPTER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet