OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

IMC0603ER15NJ

P1-P2
IMC-0603
www.vishay.com
Vishay Dale
Product is End of Life December 2015
Revision: 24-Jul-15
1
Document Number: 34039
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Frequency, Surface Mount, Laser Spiral, Coated Inductors
Note
(1)
Value obtained when current flows and temperature has risen 15 °C
FEATURES
• Very small size
• High self-resonant frequency values
• High Q values relative to size at higher
frequencies
• Coated coil provides protection and moisture
resistance
• Compatible with vapor phase and infrared reflow
soldering
• Tape and reel packaging for automatic handling,
4000/reel, EIA-481
• L and Q value not affected by mounting orientation
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Inductance Range: 1.0 nH to 220 nH
Inductance and Tolerance: ± 0.3 nH for 1.0 nH to 3.3 nH,
± 5 % for 3.9 nH to 220 nH
Operating Temperature: -40 °C to +100 °C
Core Material: Ceramic
TEST EQUIPMENT
• Inductance and Q measured on HP4291B
• SRF measured on HP8753E
• DCR measured on HP4338B
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(nH) TOL.
TEST
FREQ.
(MHz)
Q
MIN.
SRF
MIN.
(MHz)
DCR
MAX.
()
RATED
DC
CURRENT
(mA)
(1)
LQ
1.0 0.3 nH, 0.2 nH 100 1000 30 6000 0.06 500
1.2 0.3 nH, 0.2 nH 100 1000 30 6000 0.06 500
1.5 0.3 nH, 0.2 nH 100 1000 30 6000 0.07 500
1.8 0.3 nH, 0.2 nH 100 1000 30 6000 0.08 500
2.2 0.3 nH, 0.2 nH 100 1000 30 6000 0.09 500
2.7 0.3 nH, 0.2 nH 100 1000 30 6000 0.10 500
3.3 0.3 nH, 0.2 nH 100 1000 30 5500 0.12 500
3.9 5 % 100 1000 30 5500 0.15 450
4.7 5 % 100 1000 30 4800 0.17 450
5.6 5 % 100 1000 30 4600 0.19 430
6.8 5 % 100 1000 30 3550 0.20 430
8.2 5 % 100 1000 30 3500 0.28 400
10 5 %, 2 % 100 500 30 2800 0.32 400
12 5 %, 2 % 100 500 30 2800 0.35 400
15 5 %, 2 % 100 500 30 2500 0.41 350
18 5 %, 2 % 100 500 30 2300 0.45 350
22 5 %, 2 % 100 500 30 2000 0.50 300
27 5 %, 2 % 100 500 30 2000 0.55 300
33 5 %, 2 % 100 500 30 1800 0.60 300
39 5 %, 2 % 100 500 30 1800 0.80 300
47 5 %, 2 % 100 500 30 1800 0.95 250
56 5 %, 2 % 100 500 30 1800 1.20 250
68 5 %, 2 % 100 500 30 1500 1.30 250
82 5 %, 2 % 100 500 30 1500 1.50 250
100 5 %, 2 % 100 500 26 1300 1.80 200
120 5 %, 2 % 100 500 26 1200 3.00 130
150 5 %, 2 % 100 500 26 1100 4.50 100
180 5 %, 2 % 100 500 20 1000 6.50 80
220 5 %, 2 % 100 500 20 900 7.50 70
DIMENSIONS in inches [millimeters]
0.016 ± 0.008
[0.4 ± 0.20]
Recommended Pad Layout
0.039
[1.0]
0.063 ± 0.008
[1.6 ± 0.20]
0.016 ± 0.004
[0.4 ± 0.10]
0.031 ± 0.006
[0.8 ± 0.15]
0.031 ± 0.008
[0.8 ± 0.20]
0.031
[0.8]
0.083
[2.1]
DESCRIPTION
IMC-0603
10 nH
± 5 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IMC 0603 ER 10N J
PRODUCT
FAMILY
SIZE PACKAGE
CODE
INDUCTANCE
VALUE
TOL.
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 02-Oct-12
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
P1-P2

IMC0603ER15NJ

Mfr. #:
Buy IMC0603ER15NJ
Manufacturer:
Vishay / Dale
Description:
Fixed Inductors IMC-0603 .015 5% ER E3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet