DATA BRIEF
Rev 1
October 2005 1/3
3
ST7MDT10-16/DVP
DIP16/SO16 Connection Kit for ST7MDT10-DVP3
The DIP16/SO16 Connection Kit (ST7MDT10-
16/DVP) provides the hardware you need to
connect your ST7MDT10-DVP3 emulator to your
application when debugging applications for ST7
microcontrollers in DIP16 and SO16 packages.
Connection Kit Contents
■ DIP16/SO16 device adapter (DB587) – Allows
the connection of your ST7MDT10-DVP3
emulator to your application board in place of
your ST7 in DIP16 or SO16 package.
This adapter is provided by default when ordering
the ST7MDT10-DVP3 emulator (ordering code:
ST7MDT10-DVP3) and the ST7MDT10-DVP3
target emulation board (ST7MDT10-TEB/DVP).
The
34-pin flat cable
for connection between the
emulator and adapter is provided with your
ST7MDT10-DVP3 emulator.
For more information...
■ ST7-DVP3 User Manual – Information
common to all DVP3 series emulators
■ ST7MDT10-DVP3 Probe User Guide –
Information specific to ST7MDT10-DVP3
Figure 1. DIP16/SO16 device adapter (DB587)
Figure 2. DIP16 application board connection
Figure 3. SO16 application board connection
1. Solder socket to
application board.
3. Plug flat cable into the J1
connector on the adapter
4. Align pin 1 indicators, then
insert the pins of the DIP16
adapter into the socket on the
application board.
Pin 1
Indicators
2. Remove the SO16 adapter
1. Solder SO16 connection
pins to application board.
Pin 1
Indicators
For SO16
connection
2. Plug flat cable into the J1
connector on the adapter
3. Align pin 1 indicators, then
insert the SO16 connection pins
into the corresponding connector
on the device adapter.
www.st.com
Obsolete Product(s) - Obsolete Product(s)
