OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TLP175A(TPL,E

P1-P3P4-P6P7-P7
TLP175A
1
Photocouplers Photorelay
TLP175A
TLP175A
TLP175A
TLP175A
Start of commercial production
2012-08
1.
1.
1.
1. Applications
Applications
Applications
Applications
• Mechanical relay replacements
• Security Systems
• Measuring Instruments
• Factory Automation (FA)
• Amusement Equipment
• Smart Meters
• Electricity Meters
2.
2.
2.
2. General
General
General
General
The TLP175A photorelay consists of a photo MOSFET optically coupled to an infrared light emitting diode. It is
housed in a 4-pin SO6 package. This photorelay requires 1mA of LED current to turn it on. It is suitable
for applications that need electrical power savings.
3.
3.
3.
3. Features
Features
Features
Features
(1) Normally opened (1-Form-A)
(2) OFF-state output terminal voltage: 60 V (min)
(3) Trigger LED current: 1 mA (max)
(4) ON-state current: 100 mA (max)
(5) ON-state resistance: 50 Ω (max)
(6) Isolation voltage: 3750 Vrms (min)
(7) Safety Standards
UL approved: UL1577, File No. E67349
cUL approved: CSA Component Acceptance Service No. 5A File No.E67349
VDE approved: EN60747-5-5(Note)
Note: When a EN60747-5-5 approved type is needed, please designate "Option(V4)"
Note: When a EN60747-5-5 approved type is needed, please designate "Option(V4)"
Note: When a EN60747-5-5 approved type is needed, please designate "Option(V4)"
Note: When a EN60747-5-5 approved type is needed, please designate "Option(V4)"
4.
4.
4.
4. Packaging and Pin Assignment
Packaging and Pin Assignment
Packaging and Pin Assignment
Packaging and Pin Assignment
11-4M1S
1: Anode
3: Cathode
4: Drain
6: Drain
2014-05-26
Rev.2.0
TLP175A
2
5.
5.
5.
5. Internal Circuit
Internal Circuit
Internal Circuit
Internal Circuit
Fig.
Fig.
Fig.
Fig. 5.1
5.1
5.1
5.1 Internal Circuit
Internal Circuit
Internal Circuit
Internal Circuit
6.
6.
6.
6. Mechanical Parameters
Mechanical Parameters
Mechanical Parameters
Mechanical Parameters
Characteristics
Creepage distances
Clearance distances
Internal isolation thickness
TLP175A
5.0 (min)
5.0 (min)
0.4 (min)
Unit
mm
7.
7.
7.
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, T
Absolute Maximum Ratings (Note) (Unless otherwise specified, T
Absolute Maximum Ratings (Note) (Unless otherwise specified, T
Absolute Maximum Ratings (Note) (Unless otherwise specified, T
a
a
a
a
= 25
= 25
= 25
= 25
)
)
)
)
LED
Detector
Common
Characteristics
Input forward current
Input forward current derating
Input forward current (pulsed)
Input reverse voltage
Input power dissipation
Junction temperature
OFF-state output terminal voltage
ON-state current
ON-state current derating
ON-state current (pulsed)
Output power dissipation
Junction temperature
Storage temperature
Operating temperature
Lead soldering temperature
Isolation voltage
(T
a
≥ 25 )
(100 µs pulse, 100 pps)
(T
a
≥ 25 )
(t = 100 ms, Duty = 1/10)
(10 s)
AC, 60 s, R.H. ≤ 60 %
Symbol
I
F
∆I
F
/∆T
a
I
FP
V
R
P
D
T
j
V
OFF
I
ON
∆I
ON
/∆T
a
I
ONP
P
O
T
j
T
stg
T
opr
T
sol
BV
S
Note
(Note 1)
Rating
30
-0.3
1
5
50
125
60
100
-1.0
300
200
125
-55 to 125
-40 to 85
260
3750
Unit
mA
mA/
A
V
mW
V
mA
mA/
mA
mW
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are
shorted together.
Note: This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against
by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on.
2014-05-26
Rev.2.0
TLP175A
3
8.
8.
8.
8. Recommended Operating Conditions (Note)
Recommended Operating Conditions (Note)
Recommended Operating Conditions (Note)
Recommended Operating Conditions (Note)
Characteristics
Supply voltage
Input forward current
ON-state current
Operating temperature
Symbol
V
DD
I
F
I
ON
T
opr
Note Min
2
-20
Typ.
5
Max
48
15
80
65
Unit
V
mA
Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this datasheet should also be considered.
9.
9.
9.
9. Electrical Characteristics (Unless otherwise specified, T
Electrical Characteristics (Unless otherwise specified, T
Electrical Characteristics (Unless otherwise specified, T
Electrical Characteristics (Unless otherwise specified, T
a
a
a
a
= 25
= 25
= 25
= 25
)
)
)
)
LED
Detector
Characteristics
Input forward voltage
Input reverse current
Input capacitance
OFF-state current
Output capacitance
Symbol
V
F
I
R
C
t
I
OFF
C
OFF
Note Test Condition
I
F
= 10 mA
V
R
= 5 V
V = 0 V, f = 1 MHz
V
OFF
= 60 V
V = 0 V, f = 1 MHz
Min
1.1
Typ.
1.27
50
10
Max
1.4
10
1
Unit
V
µA
pF
µA
pF
10.
10.
10.
10. Coupled Electrical Characteristics (Unless otherwise specified, T
Coupled Electrical Characteristics (Unless otherwise specified, T
Coupled Electrical Characteristics (Unless otherwise specified, T
Coupled Electrical Characteristics (Unless otherwise specified, T
a
a
a
a
= 25
= 25
= 25
= 25
)
)
)
)
Characteristics
Trigger LED current
Return LED current
ON-state resistance
Symbol
I
FT
I
FC
R
ON
Note Test Condition
I
ON
= 100 mA
I
OFF
= 100 µA
I
ON
= 100 mA, I
F
= 2 mA, t < 1 s
Min
0.01
Typ.
0.2
25
Max
1
50
Unit
mA
mA
Ω
11.
11.
11.
11. Isolation Characteristics (Unless otherwise specified, T
Isolation Characteristics (Unless otherwise specified, T
Isolation Characteristics (Unless otherwise specified, T
Isolation Characteristics (Unless otherwise specified, T
a
a
a
a
= 25
= 25
= 25
= 25
)
)
)
)
Characteristics
Total capacitance (input to output)
Isolation resistance
Isolation voltage
Symbol
C
S
R
S
BV
S
Note
(Note 1)
(Note 1)
(Note 1)
Test Condition
V
S
= 0 V, f = 1 MHz
V
S
= 500 V, R.H. ≤ 60 %
AC, 60 s
AC, 1 s in oil
DC, 60 s, in oil
Min
1×10
12
3750
Typ.
0.8
10
14
10000
10000
Max
Unit
pF
Ω
Vrms
Vdc
Note 1: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are
shorted together.
12.
12.
12.
12. Switching Characteristics (Unless otherwise specified, T
Switching Characteristics (Unless otherwise specified, T
Switching Characteristics (Unless otherwise specified, T
Switching Characteristics (Unless otherwise specified, T
a
a
a
a
= 25
= 25
= 25
= 25
)
)
)
)
Characteristics
Turn-on time
Turn-off time
Symbol
t
ON
t
OFF
Note Test Condition
See Fig. 12.1.
R
L
= 200 Ω, V
DD
= 10 V, I
F
= 2 mA
Min
Typ.
1
1
Max
5
5
Unit
ms
Fig.
Fig.
Fig.
Fig. 12.1
12.1
12.1
12.1 Switching Time Test Circuit
Switching Time Test Circuit
Switching Time Test Circuit
Switching Time Test Circuit
2014-05-26
Rev.2.0
P1-P3P4-P6P7-P7

TLP175A(TPL,E

Mfr. #:
Buy TLP175A(TPL,E
Manufacturer:
Toshiba
Description:
MOSFET Output Optocouplers Trigger LED Current 1mA85dC3750 Vrms
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet