9FG430
Four Output Differential Frequency Generator for PCIe Gen3 and QPI
18
Innovate with IDT and accelerate your future networks. Contact:
www.IDT.com
For Sales
800-345-7015
408-284-8200
Fax: 408-284-2775
For Tech Support
408-284-6578
www.idt.com/go/support
Corporate Headquarters
Integrated Device Technology, Inc.
6024 Silver Creek Valley Road
San Jose, CA 95138
United States
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or
specifications described herein at any time, without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described
products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained
herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any
particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as
a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure
or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner
does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries.
Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit
www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved.
Revision History
Rev. Issue Date Who Description Page #
0.1 7/13/2010 RDW New datasheet.
A 7/13/2010 RDW Release
B7/20/2010RDW
1. Added PPM tables to DS for both 25M and 14.318M inputs
2. Added Test load figures
C8/25/2010RDW
1. Updated/reformatted Electrical Tables
2. Corrected Features/Benefits and General Description
3. Updated pull up ^ and pull down v indicators.
4. Updated termination figures to include Fig. 5 for REF output, merged test
load figures into these figures.
1, Various
D 4/4/2017 RDW 1. Corrected Byte 5 Device ID from 43 hex to 01 hex 13
