© Semiconductor Components Industries, LLC, 2015
May, 2015 − Rev. 8
1 Publication Order Number:
NVT210/D
NVT210
+15C Temperature Monitor
with Series Resistance
Cancellation
The NVT210 is a dual-channel digital thermometer and
undertemperature/overtemperature alarm, intended for use in thermal
management systems. It is register-compatible with the NCT1008 and
NCT72. A feature of the NVT210 is series resistance cancellation,
where up to 1.5 kW (typical) of resistance in series with the temperature
monitoring diode can be automatically cancelled from the temperature
result, allowing noise filtering. The NVT210 has a configurable ALERT
output and an extended, switchable temperature measurement range.
The NVT210 can measure the temperature of a remote thermal diode
accurate to ±1°C and the ambient temperature accurate to ±3°C. The
temperature measurement range defaults to 0°C to +127°C, compatible
with the NCT1008 and NCT72, but it can be switched to a wider
measurement range of −64°C to +191°C.
The NVT210 communicates over a 2-wire serial interface,
compatible with system management bus (SMBus/I
2
C) standards. The
default SMBus/I
2
C address of the NVT210 is 0x4C. An NVT210D is
available with an SMBus/I
2
C address of 0x4D. This is useful if more
than one NVT210 is used on the same SMBus/I
2
C.
An ALERT
output signals when the on-chip or remote temperature is
out of range. The THERM
output is a comparator output that allows
on/off control of a cooling fan. The ALERT
output can be reconfigured
as a second THERM
output, if required.
The NVT210 has been through Automotive Qualification according to
AEC−Q100 Grade 1 standards.
Features
• On-chip and Remote Temperature Sensor
• 0.25°C Resolution/1°C Accuracy on Remote Channel
• 1°C Resolution/1°C Accuracy on Local Channel
• Series Resistance Cancellation Up to 1.5 kW
• Extended, Switchable Temperature Measurement Range
0°C to +127°C (Default) or –64°C to +191°C
• Register-compatible with NCT1008 and NCT72
• 2-wire SMBus/I
2
C Serial Interface with SMBus Alert Support
• Programmable Over/Undertemperature Limits
• Offset Registers for System Calibration
• Up to Two Overtemperature Fail-safe THERM Outputs
• 8-lead MSOP Package and a 2 × 2 WDFN8 Package
• 240 mA Operating Current, 5 mA Standby Current
• Automotive Qualification According to AEC−Q100, Grade 1
• Pb-Free Packages are Available
Applications
• Automotive
• Embedded Systems
MARKING DIAGRAMS
www.onsemi.com
PIN ASSIGNMENT
MSOP8
DM SUFFIX
CASE 846A
See detailed ordering and shipping information in the package
dimensions section on page 18 of this data sheet.
ORDERING INFORMATION
XXXX = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G = Pb-Free Package
XXXX
AYWG
G
1
8
(Top View)
V
DD
D+
D−
THERM
SCLK
SDATA
ALERT/
THERM2
GND
1
Vx = Device Code (Where x = C or D)
M = Date Code
G = Pb-Free Package
(Note: Microdot may be in either location)
VxMG
G
1
(Note: Microdot may be in either location)
WDFN8
MT SUFFIX
CASE 511AT
WDFN8
MSOP8