EMI : EN55011: 2009, A1: 2010 Group 1, class B
EMS : EN61326-1 : 2006 Table 2
EN61326-2-3 : 2006 Annex BB
Code/Multiplier Factor
Pressure Range / Display specification rated pressure
102G 102R 103G 103R 353G 353R
1：× 1（kPa） 0.0 ∼ 100.0 -100.0 ∼ 100.0 0 ∼ 1000 -100 ∼ 1000 ー ー
2：×0.0102 .000 ∼ 1.020 -1.020 ∼ 1.020 0.00 ∼ 10.20 -1.02 ∼ 10.20 0.0 ∼ 35.7 -1.0 ∼ 35.7
3：×10.2 0 ∼ 1020 -1020 ∼ 1020 ー ー ー ー
4：×7.501 0 ∼ 750 -750 ∼ 750 ー ー ー ー
5：×0.01 .000 ∼ 1.000 -1.000 ∼ 1.000 0.00 ∼ 10.00 -1.00 ∼ 10.00 0.0 ∼ 35.0 -1.0 ∼ 35.0
6：×10 0 ∼ 1000 -1000 ∼ 1000 ー ー ー ー
7：×0.145 0.0 ∼ 14.5 -14.5 ∼ 14.5 0.0 ∼ 145.0 -14.5 ∼ 145.0 0 ∼ 508 -15 ∼ 508
8：×0.001（MPa） ー ー .000 ∼ 1.000 -.100 ∼ 1.000 0.00 ∼ 3.50 -0.10 ∼ 3.50
9：×0.2953 0.0 ∼ 29.5 -29.5 ∼ 29.5 0 ∼ 295 -30 ∼ 295 0 ∼ 1033 -30 ∼ 1033
The multiplier factor is selectable by changing the value of third digit on the display during the operation setting.
■
MULTIPLIER FACTOR
・
The settings indicated by "-" on the table above are not selectable because of resolution.
・
Either "1"
(
for 102A, 102V, 102G, and 102R) or "8" (for 103G, 103R, 353G and 353R) are set prior to delivery.
・
Changes of the multiplier factor apply to display values. Also, note the changes reset switch setting value and hysteresis.
■
SWITCH OUTPUT MODE
Pressure setting
(Operating point)
Set 1 Set 2
（Minimum）Set 1
（Maximum）Set 3
（Minimum）Set 1
（Maximum）Set 4
SW1 SW2
Separate mode
Window comparator mode
1
2
3
4
5
6
7
8
Separate
Window comparator
Separate
Window comparator
HI LO A B HI LO A B
（HI operation）
（L operation）
（A operation）
（B operation）
H：Hysteresis、
P1＝Set 1、P2＝Set 2
P3＝Set 3、P4＝Set 4
P1≦P2 or P1≧P2 P1≦P3–2H and P2≦P4–2H
Output
Mode
Operation
＜SW Operation Code＞
＜
Switch Operation Mode＞
SW output is selectable by changing the value of first digit on the display.
䞉In the Separate mode, SW 1 corresponds to Setting 1 and SW2 corresponds to Setting 2.
䞉In the Window Comparator Mode, SW 1 corresponds to the Setting 1 䠄lower limit䠅 and Setting 3 䠄upper limit䠅. Also. SW2 corresonds to the setting 2
䠄lower limit䠅 and setting 4 䠄upper limit䠅.
䞉The Hysteresis 䠄H䠅 setting is common to SW 1 and SW 2 operations.
䞉When SW operation is changed between the Separate Mode and Window Comparator Mode, SW pressure settings that are set separately will be reset.
P1/SW1, P2/SW2 P3/SW1, P4/SW2
OFF OFF
ON
-Pr Pr
HH
OFF
ON
-Pr Pr
H
H
P1/SW1 P2/SW2
OFF
ON ON
-Pr Pr
HH
P1/SW1, P2/SW2 P3/SW1, P4/SW2
ON
OFF
-Pr Pr
H
H
P1/SW1 P2/SW2
PG-75
COMPACT PRESSURE GAUGE
Test item
■
ENVIRONMENTAL CHARACTERISTICS
Test conditions
（
At 25 ± 5 °C) Permissible change
Pressure indication, switch operating pressure and
analog output : ± 5 %F.S. maximum during test
EMC
