2903374

https://www.phoenixcontact.com/pi/products/2903374

08/20/2018Page1/5

Relay Module-RIF-0-RSC-24DC/21-2903374

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Pre-assembled relay module with screw connection, consisting of: relay base with ejector and power contact

relay. Contact type: 1 changeover contact. Input voltage: 24 V DC

Key Commercial Data

EMC: class A product, see manufacturer's declaration in the download

area

Dimensions

Width 6.2 mm

Height 84 mm

Depth 82 mm

Ambient conditions

Ambient temperature (operation) -40 °C ... 60 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Coil side

Typical input current at U

N

9 mA

Typical response time 5 ms

Typical release time 8 ms

Coil voltage 24 V DC

https://www.phoenixcontact.com/pi/products/2903374

08/20/2018Page2/5

Relay Module-RIF-0-RSC-24DC/21-2903374

Technical data

Coil side

Protective circuit Damping diode

Maximum switching voltage 250 V AC/DC

Minimum switching voltage 5 V (at 100 mA)

Min. switching current 10 mA (at 12 V)

Limiting continuous current 6 A

Interrupting rating (ohmic load) max. 140 W (at 24 V DC)

20 W (at 48 V DC)

18 W (at 60 V DC)

23 W (at 110 V DC)

40 W (at 220 V DC)

1500 VA (for 250 V AC)

Connection data input side

Connection name Coil side

Connection method Screw connection

Stripping length 7 mm

Conductor cross section solid 0.5 mm² ... 4 mm²

Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 1.5 mm²

Conductor cross section flexible 0.5 mm² ... 2.5 mm²

0.5 mm² ... 2.5 mm² (Ferrules without plastic sleeve)

0.5 mm² ... 1.5 mm² (Ferrule with plastic sleeve)

Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 1.5 mm²

https://www.phoenixcontact.com/pi/products/2903374

08/20/2018Page3/5

Relay Module-RIF-0-RSC-24DC/21-2903374

Technical data

Connection data output side

Connection method Screw connection

Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 1.5 mm²

Conductor cross section flexible 0.5 mm² ... 2.5 mm²

0.5 mm² ... 2.5 mm² (Ferrules without plastic sleeve)

0.5 mm² ... 1.5 mm² (Ferrule with plastic sleeve)

Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 1.5 mm²

0.5 mm² ... 1 mm² (TWIN ferrule with plastic sleeve)

Conductor cross section AWG 20 ... 12 (solid)

20 ... 14 (flexible)

Torque 0.5 Nm ... 0.6 Nm

4 kV

(50 Hz, 1 min.)

Mechanical service life

approx. 2x 10

7

Mounting position any

Assembly instructions In rows with zero spacing

Standards and Regulations

Standards/regulations DIN EN 50178

Rated insulation voltage 250 V AC

Rated surge voltage 6 kV

Insulation safe isolation

For details about hazardous substances go to tab “Downloads”,

Category “Manufacturer's declaration”

Drawings