LTC4412
1
4412fb
For more information www.linear.com/LTC4412
Typical applicaTion
DescripTion
Low Loss PowerPath™
Controller in ThinSOT
The LT C
®
4412 controls an external P-channel MOSFET to
create a near ideal diode function for power switchover
or load sharing. This permits highly efficient OR’ing of
multiple power sources for extended battery life and low
self-heating. When conducting, the voltage drop across
the MOSFET is typically 20mV. For applications with a
wall adapter or other auxiliary power source, the load is
automatically disconnected from the battery when the
auxiliary source is connected. Tw o or more LTC4412s
may be interconnected to allow load sharing between
multiple batteries or charging of multiple batteries from
a single charger.
The wide supply operating range supports operation
from one to six Li-Ion cells in series. The low quiescent
current (11µA typical) is independent of the load current.
The gate driver includes an internal voltage clamp for
MOSFET protection.
The STAT pin can be used to enable an auxiliary P-channel
MOSFET power switch when an auxiliary supply is
detected. This pin may
also be used to indicate to a mi-
crocontroller that an auxiliar
y supply is connected.
The
control (CTL) input enables the user to force the primary
MOSFET off and the STAT pin low.
The
LTC4412 is available in a low profile (1mm) ThinSOT
package.
LTC4412 vs Schottky Diode
Forward Voltage Drop
FeaTures
applicaTions
n
Very Low Loss Replacement for Power Supply
OR’ing Diodes
n
Minimal External Components
n
Automatic Switching Between DC Sources
n
Simplifies Load Sharing with Multiple Batteries
n
Low Quiescent Current: 11µA
n
3V to 28V AC/DC Adapter Voltage Range
n
2.5V to 28V Battery Voltage Range
n
Reverse Battery Protection
n
Drives Almost Any Size MOSFET for Wide Range of
Current Requirements
n
MOSFET Gate Protection Clamp
n
Manual Control Input
n
Low Profile (1mm) ThinSOT™ Package
n
Cellular Phones
n
Notebook and Handheld Computers
n
Digital Cameras
n
USB-Powered Peripherals
n
Uninterruptible Power Supplies
n
Logic Controlled Power Switch
Figure 1. Automatic Switchover of Load Between a Battery and a Wall Adapter
V
IN
GND
CTL
SENSE
GATE
STAT
LTC4412
C
OUT
TO LOAD
STATUS OUTPUT
LOW WHEN WALL
ADAPTER PRESENT
470k
4412 F01
V
CC
BATTERY
CELL(S)
WALL
ADAPTER
INPUT
FORWARD VOLTAGE (V)
0.02
0
CONSTANT
R
ON
4412 F01b
0.5
CONSTANT
VOLTAGE
SCHOTTKY
DIODE
LTC4412
L, LT , LT C, LT M, Linear Technology and the Linear logo are registered trademarks and
PowerPath and ThinSOT are trademarks of Linear Technology Corporation. All other trademarks
are the property of their respective owners.