HDMI over Cat5/6 Active Extender, Box-Style
Receiver for Video/Audio, 1080p @60Hz up to
150ft with Intl. Power Supply
MODEL NUMBER: B126-1A0-INT
Works with Tripp Lite’s B126-Series transmitters to extend an HDMI signal via Cat5e/6 cable to multiple
projectors, monitors or televisions in a chain. Ideal for digital signs, schools and trade show presentations.
Description
The B126-1A0-INT HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite’s B126-002 or
B126-004 transmitter to extend an HDMI signal to multiple projectors, monitors or televisions in a chain.
It’s ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other
applications where the video source is located farther than conventional cables allow or that require
multiple displays connected to one source.
The receiver uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the monitor and Cat5e/6 cable
to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
The B126-1A0-INT can extend a 1080i (60 Hz) signal up to 200 feet (61 m), a 1080p (60 Hz) signal up to
150 feet (45.7 m) and a 3D signal up to 125 feet (38.1 m). You can connect up to three B126-110 remote
repeaters in the chain for a total of four HDMI displays and full signal extension of 700 feet/213.4 meters
(1080i), 500 feet/152.4 meters (1080p) or 400 feet/121.9 meters (3D).
In addition to high-definition video, the B126-1A0-INT delivers full, rich stereo and 7.1-channel surround
sound (multi-channel or PCM) audio when paired with a B126-Series transmitter. Built-in equalization
control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per
channel) and HDCP.
Features
Extends High-Definition Signals
Highlights
Works in tandem with B126-002
or B126-004 transmitter unit
●
Supports high-definition video
resolutions up to 1080p (60 Hz)
●
Supports stereo and 7.1-
channel surround sound audio
●
Works with all operating
systems and HDMI video
sources
●
Plug and play—no software or
drivers to install
●
Package Includes
B126-1A0-INT HDMI over
Cat5/Cat6 Active Remote
Receiver
●
Screwdriver for adjusting
equalization
●
External power supply w/CEE
7/16 Schuko, BS1363 UK and
AS2112 Australia plugs (Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A)
●
Mounting hardware
●
Owner’s manual
●
1 / 3