OP07 Data Sheet
Rev. G | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Ratings
Supply Voltage (V
S
)
±22 V
Input Voltage
1
22 V
Differential Input Voltage
30 V
Output Short-Circuit Duration Indefinite
Storage Temperature Range
S and P Packages
−65
C to +125
C
Operating Temperature Range
OP07E
0°C to 70°C
OP07C
−40
C to +85
C
Junction Temperature
150
C
Lead Temperature, Soldering (60 sec)
300°C
1
For supply voltages less than ±22 V, the absolute maximum input voltage is
equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 4. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
8-Lead PDIP (P-Suffix) 103 43 °C/W
8-Lead SOIC_N (S-Suffix) 158 43 °C/W
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
