UL60950-1,EN60950-1 approved
Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
Built-in active PFC function
High efficiency up to 90%
Low leakage current<0.4mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection for 150W
and 200W with 30CFM forced air
Low profile:32mm
Conformal coated
ZVS technology to reduce power dissipation
Built-in remote sense
LED indicator for power on
3 years warranty
100W
152W
PEAK POWER
(30CFM FAN)
200W
2.35~2.75V
3.4~4.2V
VOLTAGE ADJ. RANGE
4.5~5.5V
140~180% rated output power
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.4
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER TEMPERATURE
SAFETY STANDARDS
EMC EMISSION
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
AC CURRENT (Typ.)
2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
0.8A/115VAC 0.4A/230VAC
Cold start 70A/230VAC
<0.4mA / 240VAC
3.2 ~ 3.7V
4.7 ~ 5.7V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
110 5 (TSW1)℃± ℃
Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,EN61000-3-3
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
±℃ ℃)0.03%/ (0 ~ 60
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
263.2K hrs min. MIL-HDBK-217F (25 )℃
86%
PF 0.95/230VAC PF 0.98/115VAC at full load≥≥
16ms/230VAC 16ms/115VAC at full load
88%
±1.0%
±1.0%
±0.5%
±0.5%
±2.0%
±2.0%
80mVp-p
100mVp-p
2.5V
30A
0 ~ 40A
3.8V
30A
0 ~ 40A
HSP-150-2.5
HSP-150-3.8
File Name:HSP-150-SPEC 2017-07-13
■ Features :
HSP-150 series
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
ENVIRONMENT
SAFETY &
EMC
(Note 5)
PROTECTION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25 / 70%RH℃
PEAK CURRENT RANGE
(30CFM FAN)
5.7 ~ 7.0V
90%
±1.0%
±0.5%
±2.0%
100mVp-p
5V
30A
0 ~ 40A
HSP-150-5
150W Single Output with PFC Function
Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV), criteria A
115 5 (TSW1)℃± ℃
SHORT CIRCUIT
Protection type : Hiccup mode, recovers automatically after fault condition is removed
220*62*32mm (L*W*H)
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Hiccup mode, recovers automatically after fault condition is removed
1.5A/115VAC 0.8A/230VAC
0 ~ 30A
0 ~ 30A
CURRENT RANGE
(convection)
0 ~ 30A
75W
114W
RATED POWER
(convection)
150W
0.61kg; 24pcs/15.6kg/1.63CUFT
1.2A/115VAC 0.6A/230VAC
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
