GP2A25J0000F Series
1
Sheet No.: D3-A04901FEN
Date Jun. 30. 2005
© SHARP Corporation
Notice The content of data sheet is subject to change without prior notice.
In the absence of confi rmation by device specifi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specifi cation sheets before using any SHARP device.
GP2A25J0000F
Series
Detecting Distance : 1 to 9mm
*
OPIC Output,
Refl ective Photointerrupter with
Connector
■
Description
GP2A25J0000F Series
are OPIC output, reflective
photointerrupters with emitter and detector facing the
same direction in a molding that provides non-contact
sensing. This family of devices uses light modulation to
reduce the affects of disturbing light, and the sensor is
optimized to work in the selected focal distance. A 3-pin
connector is included to allow remote-mount or off-board
designs.
■
Features
1. Refl ective with OPIC Light Modulated Output
2. Highlights :
• Includes additional screw fi xing holes
• Position pin to prevent mis-alignment
• Short focal distance
3. Key Parameters:
• Detecting distance : 1 to 9mm (White paper)
3 to 7mm (Black paper)
• Undetecting distance : over 27mm (White paper)
•
Connector :
GP2A25J0000F
; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A25DJ000F
; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A25NJJ00F
; Tyco Electronics AMP K.K.
(PN : 4-292133-3)
4. RoHS directive compliant
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of paper presence or mo-
tion.
2. Example : PPC, FAX, Printer
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
