S102T02 Series
S202T02 Series
■ Features
I
T
(rms)≤2A, Zero Cross type
Low profile SIP 4pin
Triac output SSR
1. Output current, I
T
(rms)≤2.0A
2. Zero crossing functionary (V
OX
: MAX. 35V)
3. Slim 4 pin low profile SIP package
4. High repetitive peak off-state voltage
(V
DRM
: 600V, S202T02 Series)
(V
DRM
: 400V, S102T02 Series)
5. High isolation voltage between input and output
(V
iso
(rms) : 3.0kV)
6. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
7. Screw hole for heat sink
■ Description
S102T02 Series and S202T02 Series Solid State
Relays (SSR) are an integration of an infrared emitting
diode (IRED), a Phototriac Detector and a main output
Triac. These devices are ideally suited for controlling
high voltage AC loads with solid state reliability while
providing 3.0kV isolation (V
iso(rms)
) from input to out-
put.
1
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
S102T02 Series
S202T02 Series
■ Agency approvals/Compliance
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Power control in applications such as lighting and
temperature control equipment.
■ Applications
1.
Recognized by UL508, file No. E94758 (as models No.
S102T02/S202T02)
2. Approved by CSA 22.2 No.14, file No. LR63705 (as
models No.
S102T02/S202T02
)
3. Package resin : UL flammability grade (94V-0)
Sheet No.:D4-A01601EN
Date Apr. 28. 2004
© SHARP Corporation
∗
Non-zero cross type is also available. (S102T01 Series/
S202T01 Series)
