Panasonic Corporation 2013©
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
AYF31
–2–
ACCTB9E 201309-T
PRODUCT TYPES
Notes: 1. Order unit;
For volume production: 1-inner carton (1-reel) units
Samples for mounting check: 50-connector units. Please contact our sales offic .
Samples: Small lot orders are possible. Please contact our sales offic .
2. Please contact our sales office or connectors having a number of pins other than those listed above.
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
Height Number of pins Part number
Packing
Inner carton Outer carton
0.9 mm
11 AYF311115
5,000 pieces 10,000 pieces
13 AYF311315
15 AYF311515
17 AYF311715
23 AYF312315
25 AYF312515
27 AYF312715
29 AYF312915
31 AYF313115
33 AYF313315
35 AYF313515
39 AYF313915
41 AYF314115
45 AYF314515
51 AYF315115
Item Specification Conditions
Electrical
characteristics
Rated current 0.2A/pin contact
Rated voltage 50V AC/DC
Insulation resistance Min. 1,000MΩ (initial) Using 250V DC megger (applied for 1 min.)
Breakdown voltage 150V AC for 1 min.
No short-circuiting or damage at a detection current of 1 mA
when the specified oltage is applied for one minute.
Contact resistance Max. 80mΩ
Based on the contact resistance measurement method
specified y JIS C 5402.
Mechanical
characteristics
FPC holding force Min. 0.23N/pin contacts × pin contacts (initial)
Measurement of the maximum force applied until the
inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
Environmental
characteristics
Ambient temperature –55°C to +85°C
No freezing at low temperatures. No dew condensation.
Storage temperature
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
Thermal shock resistance
(with FPC mated)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 80mΩ
Conformed to MIL-STD-202F, method 107G
Humidity resistance
(with FPC mated)
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 80mΩ
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Saltwater spray resistance
(with FPC mated)
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 80mΩ
Bath temperature 35±2°C,
saltwater concentration 5±1%
H2S resistance
(with FPC mated)
48 hours,
contact resistance max. 80mΩ
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Soldering heat resistance
Peak temperature: 260°C or less Refl w soldering
300°C within 5 sec. 350°C within 3 sec. Soldering iron
Lifetime
characteristics
Insertion and removal life 30 times Repeated insertion and removal: min. 10 sec./time
Unit weight 51 pin contact type: 0.09 g
Part name Material Surface treatment
Molded portion
Housing: LCP resin (UL94V-0)
Lever: LCP resin (UL94V-0)
—
Contact Copper alloy
Contact portion; Base: Ni plating, Surface: Au plating
Te r minal portion; Base: Ni plating, Surface: Au plating
Soldering terminals portion Copper alloy Base: Ni plating, Surface: Au plating
Order Temperature (°C) Time (minutes)
1
2
3
4
–55
85
–55
0
−3
30
Max. 5
30
Max. 5
+3
0
0
−3
To Be Discontinued
Last time buy:September 30, 2014