VEMI45AB-HNH-GS08 Datasheet VEMI45AB-HNH-GS08 | P4-P6

VEMI45AB-HNH

www.vishay.com

Vishay Semiconductors

Rev. 1.5, 03-Aug-12

Document Number: 81716

For technical questions, contact: EMIFilter@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Forward Current I

vs. Forward Voltage V

Fig. 4 - Typical Reverse Voltage V

vs.

Reverse Current I

Fig. 5 - Typical Peak Clamping Voltage V

vs.

Peak Pulse Current I

Fig. 6 - Typical Input Capacitance C

vs. Input Voltage V

Fig. 7 - Typical Small Signal Transmission (S21)

at Z

= 50 

0.5 0.6 0.7 0.8 0.9 1

0.001

0.01

0.1

100

(V)

(mA)

20705

0.01 0.1 1 10 100 1000 10 000

(µA)

(V)

20707

(A)

01234567

(V)

20709

Input clamping voltage

Output clamping voltage

Measured

acc. IEC 61000-4-5

(8/20 µs - wave form)

0123456

20706

(V)

(pF)

f = 1 MHz

- 35

- 30

- 25

- 20

- 15

- 10

- 5

1 100 1000 10 000

Frequency (MHz)

Transmission (S21) (dB)

INPUT

= 5 V

20708

INPUT

= 0 V

INPUT

= 1 V

INPUT

= 2 V

Measured in a 50 Ω system

- 40

VEMI45AB-HNH

www.vishay.com

Vishay Semiconductors

Rev. 1.5, 03-Aug-12

Document Number: 81716

For technical questions, contact: EMIFilter@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters (inches): LLP1713-9L

20386

Foot print recommendation:

Created - Date: 28. August 2006

Document no.:S8-V-3906.04-001 (4)

1.75 (0.069)

1.65 (0.065)

Pin 1 marking

0.05 (0.002)

0 (0.000)

0.152 (0.006) ref.

1.2 (0.047) ref.

0.3 (0.012)

0.24 (0.009)

0.4 (0.016) bsc

0.23 (0.009)

0.17 (0.007)

1.05 (0.041)

1.4 (0.055)

1.3 (0.051)

0.6 (0.024)

0.5 (0.020)

0.45 (0.018)

0.35 (0.014)

exp. DAP

0.2 (0.008) x 45°

Solder

resist mask

Solder pad

0.4 (0.016)

0.2 (0.008)

3 x 0.4 = 1.2 (0.047)

1 (0.039)

0.4 (0.016)

0.15 (0.006)

0.4 (0.016)

0.42 (0.017)

Rev. 1 - Date: 27. May 2008

Legal Disclaimer Notice

www.vishay.com

Vishay

Revision: 08-Feb-17

Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

P1-P3 P4-P6

VEMI45AB-HNH-GS08

Mfr. #:

Buy VEMI45AB-HNH-GS08

Manufacturer:

Vishay Semiconductors

Description:

EMI Filter Circuits 4 Channel 4.0 Amp 40pF

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

VEMI45AB-HNH-GS08