https://www.phoenixcontact.com/us/products/2987309
10/23/2014Page2/4
Relay Module-PLC-2RSC-24DC/ 1-2987309
Technical data
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -20 °C ... 60 °C
Coil side
Nominal input voltage U
N
24 V DC
Typical input current at U
N
7 mA
Typical response time 4 ms
Typical release time 6 ms
Operating voltage display Yellow LED
Protective circuit Protection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Contact side
Contact type 2 N/O contacts (2 relays with 1 N/O contact)
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 24 V AC/DC
Min. switching current 5 mA
Limiting continuous current 3.5 A
Interrupting rating (ohmic load) max. 84 W (at 24 V DC)
24 W (at 48 V DC)
24 W (at 60 V DC)
31 W (at 110 V DC)
46 W (at 220 V DC)
875 VA (for 250 V AC)
General
Test voltage relay winding/relay contact 3 kV AC (50 Hz, 1 min.)
Test voltage relay contact/relay contact 3 kV AC (50 Hz, 1 min.)
Operating mode 100% operating factor
Mechanical service life
2 x 10
7
cycles
Inflammability class according to UL 94 V0
Designation Air and creepage distances between the power circuits
Standards/regulations IEC 60664
EN 50178
IEC 62103
Rated surge voltage / insulation
6 kV, safe isolation between input and output.
4 kV, basic insulation between the outputs.
Rated insulation voltage 250 V AC