www.irf.com 1
Features
IRAMX16UP60B
Series
16A, 600V
with Internal Shunt Resistor
Integrated Power Hybrid IC for
Appliance Motor Drive Applications.
Description
International Rectifier's IRAMX16UP60B is a 16A, 600V Integrated Power Hybrid IC with Internal Shunt
Resistor for Appliance Motor Drives applications such as air conditioning systems and compressor drivers as
well as for light industrial application. IR's technology offers an extremely compact, high performance AC
motor-driver in a single isolated package to simplify design.
This advanced HIC is a combination of IR's low V
CE(on)
Punch-Through IGBT technology and the industry
benchmark 3 phase high voltage, high speed driver in a fully isolated thermally enhanced package.
A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and
integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. Using a
Single in line package (SiP2) with full transfer mold structure minimizes PCB space and resolve isolation
problems to heatsink.
PD-96-957 RevD
• Internal Shunt Resistor
• Integrated Gate Drivers and Bootstrap Diodes
• Temperature Monitor
• Low V
CE(on)
Non Punch Through IGBT Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.75~2.2kW / 85~253 Vac
• Isolation 2000V
RMS
min
• UL certification pending (UL number: E78996)
Absolute Maximum Ratings
Parameter Description Value Units
V
CES
/ V
RRM
IGBT/Diode Blocking Voltage 600
V
+
Positive Bus Input Voltage 450
I
O
@ T
C
=25°C
RMS Phase Current (Note 1) 16
I
O
@ T
C
=100°C
RMS Phase Current (Note 1) 8
I
O
Pulsed RMS Phase Current (Note 2) 30
F
PWM
PWM Carrier Frequency 20 kHz
P
D
Power dissipation per IGBT @ T
C
=25°C
31 W
V
ISO
Isolation Voltage (1min) 2000
V
RMS
T
J
(IGBT & Diodes)
Operating Junction temperature Range -40 to +150
T
J
(Driver IC)
Operating Junction temperature Range -40 to +150
T Mounting torque Range (M3 screw) 0.5 to 1.0 Nm
Note 1: Sinusoidal Modulation at V
+
=400V, T
J
=150°C, F
PWM
=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t
P
<100ms; T
C
=25°C; F
PWM
=16kHz. Limited by I
BUS-ITRIP
, see Table "Inverter Section Electrical Characteristics"
V
A
°C