CS7331P-CAZR

7 Cirrus Logic Confidential DS1165PP1
CS7331P
4.3 Phase Response
4.3 Phase Response
Test conditions: VDD = 1.8 V, GND = 0 V, no output load.
Figure 4-3. Phase Response vs. Frequency (20 Hz–10 kHz)
4.4 THD Performance
Test conditions: VDD = 1.8 V, GND = 0 V, no output load.
Figure 4-4. THD (%) vs. Input Sound Pressure Level (dB SPL)
-20.0
-10.0
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
10 100 1000 10000
Phase (
o
)
Frequency (Hz)
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
90.0 95.0 100.0 105.0 110.0 115.0 120.0 125.0 130.0
THD (%)
Input Sound Pressure Level (dB SPL)
8 Cirrus Logic Confidential DS1165PP1
CS7331P
4.5 PSRR Performance
4.5 PSRR Performance
Test conditions: VDD = 1.8 V, GND = 0 V, no output load.
Figure 4-5. PSRR (dB) vs. Frequency (100 Hz–10 kHz)
5 Applications Information
Cirrus Logic provides a range of audio codecs incorporating an analog microphone input interface. These codecs support
direct connections to silicon microphones such as the CS7331P.
Further information on Cirrus Logic audio codecs is provided in the respective product data sheet, which is available from
the Cirrus Logic website.
5.1 Important Assembly Guidelines
Do not put a vacuum over the port hole of the microphone. Placing a vacuum over the port hole can damage the
device.
Do not board wash the microphone after a reflow process. Board washing and the associated cleaning agents can
damage the device.
Do not expose to ultrasonic cleaning methods.
Do not use a vapor phase reflow process. The vapor can damage the device.
Please refer to application note WAN0273 MEMS Mic Assembly and Handling Guidelines for further assembly and
handling guidelines.
40.0
42.0
44.0
46.0
48.0
50.0
52.0
54.0
56.0
58.0
60.0
62.0
64.0
66.0
68.0
70.0
100 1000 10000
PSRR (dB)
Frequency (Hz)
DS1165PP1 Cirrus Logic Confidential 9
CS7331P
5.2 PCB Land Pattern and Paste Stencil
5.2 PCB Land Pattern and Paste Stencil
The recommended PCB Land Pattern and Paste Stencil Pattern for the CS7331P microphone are shown in Fig. 5-1 and
Fig. 5-2 respectively.
Note that no connection to Pin 4 should be made on the PCB. To avoid accidental connection to Pin 4, it is recommended
to ensure there are no exposed tracks, vias, or copper areas beneath Pin 4.
See also application note WAN0284 General Design Considerations for MEMS Microphones for further details of PCB
footprint design. Full definition of the package dimensions is provided in Section 6.
The recommended PCB Land Pattern is shown in Fig. 5-1.
Figure 5-1. PCB Land Pattern, Top View
The recommended PCB Paste Stencil Pattern is shown in Fig. 5-2.
Figure 5-2. PCB Paste Stencil, Top View

CS7331P-CAZR

Mfr. #:
Manufacturer:
Cirrus Logic
Description:
MEMS Microphones Compact Bottom Port Analog Mic
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet