SIL10E-05S1V2-H Datasheet SIL10E-05S1V2-H, SIL10E-05S1V8-V, SIL10E-05S2V5-V | P1-P3

DC/DC CONVERTERS E Class Non-isolated 1

2 YEAR WARRANTY

SIL10E Series

Single output

NEW Product

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

SPECIFICATIONS

OUTPUT SPECIFICATIONS

Voltage adjustability Fixed output versions ±10%

5Vin with wide trim 3.6V to 0.8V

3.3Vin with wide trim 2.75V to 0.8V

Setpoint accuracy ±2.7%

Line regulation ±1.0%

Load regulation ±1.0%

Minimum load 0A

Overshoot/undershoot None

Ripple and noise 50mV pk-pk

0 to 20MHz BW 25mV rms max.

Temperature co-efficient ±0.01%/ºC

Transient response 50mV max. deviation

50µs recovery to

within ±1.0%

Remote sense 10% Vo compensation

INPUT SPECIFICATIONS

Input voltage range 3.0 to 5.5VDC

Input current No load 70mA

Input current (max.) 8A max. @ Io max.

and Vout = 3.3V

Input current ripple 65mA rms

Remote ON/OFF (See Note 1)

Start-up time 20ms

File Name: sil10e.pdf Rev: 27 Feb 2003

International Safety Standard Approvals

UL/cUL CAN/CSA 22.2 No. E174104

UL60950 file No. E174104

TÜV TÜV Product Service (EN60950) Certificate No. B02 12 38572 035

CB report and certificate to IEC60950

EMC CHARACTERISTICS

Electrostatic discharge EN61000-4-2, IEC801-2

Conducted immunity EN61000-4-6

Radiated immunity EN61000-4-3

GENERAL SPECIFICATIONS

Efficiency See table

Insulation voltage Non-isolated

Switching frequency Fixed 300kHz typ.

Approvals and EN60950

standards UL/cUL60950

Material flammability UL94V-0

Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm

(Vertical version) 2.0 x 0.31 x 0.5 inches

Pin length Vertical 0.135 ±0.02 in (3.43 ±0.5mm)

Weight 5g (0.18oz)

MTBF Telcordia SR-332 7,042,000

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient, -40ºC to +100ºC

(See Note 2)

Non-operating -40ºC to +125ºC

PROTECTION

Short-circuit protection Continuous

Thermal protection Automatic recovery

• 10A Current rating

• Input voltage range: 3.0V - 5.5V

• Output voltage range: 0.8V - 3.63V

• Ultra high efficiency: 95% @ 5Vin and 3.3Vout

• Extremely low internal power dissipation

• Minimal thermal design concerns

• Designed in reliability: MTBF of >7 million hours

per Telcordia SR-332

• Ideal solution where board space is at a premium

or tighter card pitch is required

• Industry standard footprint and pin out

The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint

giving designers a cost effective solution for conversion from either a 5V or a 3.3V source.

The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry

leading 10A which allows maximum design flexibility and a pathway for future upgrades.

The SIL10E is designed for applications that include distributed power, workstations, optical

network and wireless applications. Implemented using state of the art surface mount

technology and automated manufacturing techniques, the SIL10E offers compact size and

efficiencies of up to 95%.

Output Voltage Adjustment of the SIL10-05Wxxx Series

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1 Referenced to ground for shutdown. If pin 6 is high unit will shutdown.

If pin 6 is open unit will operate as normal. Converter is guaranteed OFF

when control pin is greater than 1.2V.

2 Full de-rating curves available in both the Long Form Data Sheet and

Application Note 134.

3 For certain applications that use low ESR capacitors on the output of the

convertor and to insure maximum converter stability, please add the

suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02.

CAUTION: High internal temperatures. Ensure that unit is not user

accessible.

SIL10E Series

Single output

DC/DC CONVERTERS E Class Non-isolated2

NEW Product

File Name: sil10e.pdf Rev: 27 Feb 2003

SIL10E-05S3V3-V

Part Number System with Options

Product Family

SIL = Single In Line

Rated Output Current

10 = 10Amps

Mounting Option

V = Vertical Mount

H= Horizontal Mount

Number of Outputs

S = Single

W = Wide

Input Voltage

05 = 3.0V - 5.5V

12 = 10V - 14V

Output Voltage

2.5V, 3.3V etc

The ultra-wide output voltage trim range offers major advantages to users who

select the SIL10E-05W3V3. It is no longer necessary to purchase a variety of

modules in order to cover different output voltages. The output voltage can be

trimmed in a range of 0.8V to 3.6V. When the SIL10E-05W3V3 converter

leaves the factory the output has been adjusted to the default voltage of 3.3V

• When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V

•

When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V

Output Voltage Adjustment of the SIL10E-05W3V3 Series

OUTPUT

INPUT OUTPUT

OUTPUT OUTPUT

EFFICIENCY

REGULATION

MODEL

POWER

VOLTAGE VOLTAGE

CURRENT CURRENT

(TYP.)

LINE LOAD

NUMBER

(MAX.) (MIN.) (MAX.)

8.8W 3.0V - 5.5V 0.8V 0A 10A 83% ±1% ±1.5% SIL10E-05S0V8-V

11W 3.0V - 5.5V 1.0V 0A 10A 86% ±1% ±1.5% SIL10E-05S1V0-V

13.2W 3.0V - 5.5V 1.2V 0A 10A 88% ±1% ±1% SIL10E-05S1V2-V

(3)

16.5W 3.0V - 5.5V 1.5V 0A 10A 90% ±1% ±1% SIL10E-05S1V5-V

19.8W 3.0V - 5.5V 1.8V 0A 10A 92% ±1% ±1% SIL10E-05S1V8-V

22W 3.0V - 5.5V 2.0V 0A 10A 93% ±1% ±1% SIL10E-05S2V0-V

27.5W 3.0V - 5.5V 2.5V 0A 10A 94% ±1% ±1% SIL10E-05S2V5-V

(3)

36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10E-05S3V3-V

36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10E-05W3V3-V

Performance

E= Enhanced Performace

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

SIL10E Series

Single output

DC/DC CONVERTERS E Class Non-isolated 3

NEW Product

0.170 (4.32)

0.316 ±0.008

(8.03 ±0.20)

PCB

SIDE VIEW

PIN VIEW

2.000 ±0.020

(50.80 ±0.50)

0.100 (2.54)

1.900 (48.26)

0.050 (1.27)

0.500 (12.70)

15362

1543 2

Dimensions in Inches (mm)

Tolerances (unless otherwise specified)

2 Place ±0.15

3 Place ±0.006

Figure 1: Mechanical Drawing - Horizontal Mount Version

Figure 2: Mechanical Drawing - Vertical Mount Version

2003

The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet

www.artesyn.com

File Name: sil10e.pdf Rev: 27 Feb 2003

J1 PIN CONNECTIONS

PIN NUMBER FUNCTION

1+Vout

2+Vout

3 Remote Sense (+)

4+Vout

5Ground

J2 PIN CONNECTIONS

PIN NUMBER FUNCTION

1Ground

2+Vin

3+Vin

4 No Pin

5Trim

6 Remote ON/OFF

1.900 (48.26)

0.050 (1.27)

0.100 (2.54)

2.000 ±0.020

(50.80 ±0.50)

FRONT VIEW

0.500 (12.70)

0.635 (16.13)

0.135 (3.43)

PCB

0.168 (4.26)

SIDE VIEW

0.307 ±0.008

(7.80 ±0.20)

15432

15632

Dimensions in Inches (mm)

Tolerances (unless otherwise specified)

2 Place ±0.15

3 Place ±0.006

P1-P3

SIL10E-05S1V2-H

Mfr. #:

Buy SIL10E-05S1V2-H

Manufacturer:

Artesyn Embedded Technologies

Description:

Non-Isolated DC/DC Converters End of Life, use SIL10E-05W3V3-HJ

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

SIL10E-05S1V2-H

SIL10E-05S1V2-H

Products related to this Datasheet