https://www.phoenixcontact.com/us/products/2905229
09/29/2015Page4/7
Type 3 surge protection device-PLT-SEC-T3-230-FM-2905229
Technical data
Indicator/remote signaling
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
AWG conductor cross section 24 ... 12
Connection data
Connection method Screw connection
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
AWG conductor cross section 24 ... 12 (IEC)
24 ... 12 (UL)
Screw thread M3
Tightening torque 0.8 Nm
Stripping length 8 mm
UL specifications
UL class SPD type 4CA
Maximum continuous operating voltage MCOV 255 V AC
230 V DC
Nominal voltage 230 V DC
Mode of protection L-N
L-G
N-G
(L+) - (L-)
(L+) - G
(L-) - G
Power distribution system 1
Nominal frequency 50/60Hz
Measured limiting voltage MLV (L-N) 1270 V
Measured limiting voltage MLV (L-G) 1280 V
Measured limiting voltage MLV (N-G) 1208 V
Measured limiting voltage MLV (L+) - (L-) 1270 V
Measured limiting voltage MLV (L+) - G 1280 V
Measured limiting voltage MLV (L-) - G 1280 V
Nominal discharge current I
n
3 kA