ISL78302A
4
FN7932.2
December 22, 2015
Submit Document Feedback
Absolute Maximum Ratings Thermal Information
Supply Voltage (V
IN
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+7.1V
V
O
1, V
O
2 Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3.6V
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (V
IN
+ 0.3)V
ESD Ratings
Human Body Model (Tested per JESD22-A114E) . . . . . . . . . . . . . . . . 3000V
Machine Model (Tested per JESD-A115-A) . . . . . . . . . . . . . . . . . . . . . . 200V
Charge Device Model (Tested per AEC-Q100-011) . . . . . . . . . . . . . . 1500V
Thermal Resistance
JA
(°C/W)
JC
(°C/W)
10 Ld 3x3 DFN Package (Notes 4
, 5). . . . . 59 18.5
Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . .-40°C to +125°C
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
Recommended Operating Conditions
Ambient Temperature Range (T
A
) . . . . . . . . . . . . . . . . . . .-40°C to +105°C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . .-40°C to +105°C
Supply Voltage (VIN). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3V to 6.5V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4.
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379
.
5. For
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Unless otherwise noted, all parameters are guaranteed over the operational supply voltage and temperature
range of the device as follows: T
A
= -40°C to 105°C; V
IN
= (V
O
+ 0.5V) to 6.5V with a minimum V
IN
of 2.3V; C
IN
= 1µF; C
O
= 1µF; C
BYP
= 0.01µF;
C
POR
=0.01µF. Boldface limits apply over the operating temperature range, -40°C to +105°C.
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 6
)TYP
MAX
(Note 6)UNITS
DC CHARACTERISTICS
Supply Voltage V
IN
2.3 6.5 V
Ground Current Quiescent condition: I
O1
= 0µA; I
O2
= 0µA
I
DD1
One LDO active 30 36 µA
I
DD2
Both LDO active 47 55 µA
Shutdown Current I
DDS
0.3 2.1 µA
UVLO Threshold V
UV+
1.9 2.1 2.3 V
V
UV-
1.6 1.8 2.0 V
Regulation Voltage Accuracy V
IN
= V
O
+ 0.5V to 5.5V, I
O
= 10µA to 300mA, T
J
= +25°C -0.8 +0.8 %
V
IN
= V
O
+ 0.5V to 5.5V, I
O
= 10µA to 300mA, T
J
= -40°C to +125°C -1.8 +1.8 %
Maximum Output Current I
MAX
Continuous 300 mA
Internal Current Limit I
LIM
320 475 650 mA
Dropout Voltage (Note 7)V
DO1
I
O
= 300mA; V
O
2.5V 450 mV
I
O
= 150mA; V
O
2.5V 225 250
V
DO2
I
O
= 300mA; 2.5V V
O
2.8V 250 mV
I
O
= 150mA; 2.5V V
O
2.8V 125 160 mV
V
DO3
I
O
= 300mA; V
O
> 2.8V 230 mV
I
O
= 150mA; V
O
> 2.8V 115 145 mV
Thermal Shutdown Temperature T
SD+
145 °C
T
SD-
110 °C
AC CHARACTERISTICS
Ripple Rejection I
O
= 10mA, V
IN
= 2.8V(min), V
O
= 1.8V, C
BYP
= 0.1µF
@ 1kHz 90 dB
@ 10kHz 70 dB
@ 100kHz 50 dB