W2GF-02
Exterior dimensions
About usage
(1) Usage
The touch switch incorporating the specifications required in each application is
available by making the electrode of this product come into contact with the
member (made of metal material or metal plated member) for touch switch and
fixing it. The through-hole in the electrode allows its attachment with a screw.
(2) FG terminal
Due to the characteristics of touch switches, static electricity of human body may
intrude into a touch switch through the electrode. The FG terminal is provided as
the path for discharging the static electricity.
To effectively use the FG terminal as anti-static measure, you are recommended to
connect the terminal to the area of stable electric potential including the frame
ground in the machine with thick and short wiring. When not using the FG terminal,
connect it to GND.
Precautions for use
(1) As the touch switch member, use a conductive member including metal member and metal plated member.
(2) Be sure to insulate the touch switch member and the electrode of this product from the earthing conductor.
(3) Depending on the conditions including the size of the touch switch member and its surrounding metals, the regularly applied
capacitance differs. Before using the product, check that the applied capacitance is equal to or smaller than the rated
detection capacitance with the touch switch member attached.
(4) Do not apply stress that causes the bending of the electrode during use.
code
name
Note: 1. The relationship between the
terminal numbers and
symbols are shown below.
2. The housing compatible with the
connector shall be Type
51065-040 series made by
Molex Japan LLC.
* Unless otherwise specified, the dimensional
tolerance shall be IT16. [Unit: mm]
arrangement
member