KC7050Y312.500L20EZU

KYOCERA KINSEKI Yamagata
Corporation
Dwg No K1101-12001-SF2 7/8
KBSK-5332
7. Taping Specifications
7-1. Taping Quantities:
The tape of one reel shall pack with maximum 500 pcs.
• KC7050Y shall be contained continuously in pocket.
Unit: (mm)
Unit: (mm)
Symbol
A
0
B
0
W F E
Symbol
A B C
Dimensions 5.6
±
0.1
7.8
±
0.1
16.0
±
0.3
7.5
±
0.1
1.75
±
0.1
Dimensions
φ
330
±
2
φ
100
±
1
φ
13
±
2
Symbol
P
1
P
2
P
0
D
0
T
Symbol
D E F
Dimensions 8.0
±
0.1
2.0
±
0.1
4.0
±
0.1
1.5+0.1/0
0.3
±
0.05
Dimensions
2.0
±
0.5
φ
21
±
0.8
120
°
Symbol
K D
1
Symbol
W T
Dimensions 1.9
±
0.1
1.55
±
0.05
Dimensions
17.5
±
0.5
2
±
0.5
Fig.6 Emboss Carrier
Fig.7 Reel
7-2. Leader and Blank Pocket
• Package shall consist of leader, blank pocket and loaded pocket as follows. “Fig.8”
The power peeling top tape from carrier one shall be 0.1N {10gf} to 0.7N {70gf}. “Fig.9”
A) Blank Pocket (350mm to 500mm)
B) Load Pocket
C) Blank Pocket (250mm minimum)
Fig.8 Taping
Fig.9 Peeling Strength
Carrier Tape
Top Tape
Pulling Direction
165º to 180º
Carrier Tape
Top Tape
Pulling Direction
165º to 180º
B
A
W
T
D
C
F
E
P
0
D
1
B
0
P
1
P
2
D
0
E
F
W
A
0
Marking
K
T
P
0
D
1
B
0
P
1
P
2
D
0
E
F
W
A
0
Marking
K
T
ABC
テープ引き出し方向
KYOCERA KINSEKI Yamagata
Corporation
Dwg No K1101-12001-SF2 8/8
KBSK-5332
8. Package
Fig.10 Package
9. The agreement of this specifications
If you find further points in this specifications, contact us within 45 days after the date of issue.
10. Remarks on Usage
10-1. Storage Condition
Parts should be stored in temperature range of -5 to +40°C, humidity 40 to 60% RH, and avoid direct
sunlight. Then use within 6 months.
10-2. Handling Condition
Although KC7050Y has protection circuit against static electricity, when excess static electricity is applied,
the inside IC may get damaged.
When mounting on PCB, please make sure the direction of KC7050Y is correct, otherwise KC7050Y will
increase in temperature and may damaged.
Please do not use KC7050Y under unfavorable condition such as beyond specified range in catalogue or
specification sheet.
When using an auto-mounting machine, select the one which give silent impulse as little as possible to the
relevant components and operate it with much attentive confirmation so that it may not cause damaged.
After making the KC7050Y mounted on a printed ciruit board, if it is required to divide the printed circuit
board into another one, use it with attentive confirmation so that a warp cased by this division might not
affect any damage. When designing a printed circuit board as well as handling the mounting location, the
printed circuit board has to be being stress free area as much as possible.
Please do not use KC7050Y under condition in the water or salt water will drop on KC7050Y and under
environment of dew or harmful gas.
10-3. Soldering
Please use KC7050Y under condition " IR or Vapor phase Reflow " only.
10-4. Washing Condition
If KC7050Y is applied ultrasonic, it may be inferior and destroy.
Please don’t use ultrasonic cleaner.
In case of using KC7050Y without above precaution, Kyocera is unable to guarantee the specified
characteristics.
D=340mm
W=340mm
H= 40mm
DUT
LABEL
LABEL
W
D
H
Dry Pack
LABEL
Vinyl Pack
DUT
LABEL
Customer
Part Number
Quantity
Frequency
Model
Company
State

KC7050Y312.500L20EZU

Mfr. #:
Manufacturer:
N/A
Description:
Standard Clock Oscillators 2.5volts 312.500MHz 7x5mm SAW
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union