R20307RR02Q

K
Rotary
K–
18
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
Models A
vailable
R Series
ROTA-SLIDE
®
Rotary Switches
Features/Benefits
Multi-pole and multi-position
Positive detent
Panel and PCB mounting
Enclosed
RoHS Compliant
T
ypical Applications
Ceiling fans
Industrial equipment
Portable tools
Specifications
CONTACT RATING: Q contact material: 5 AMPS @ 125 V AC;
2.5 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC; 1/8 HP @ 125
and 250 VAC (UL/CSA).
See page K-20 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 10
9
min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 36º-one contact models, 10 position max.; two contact
models, 5 position max.
OPERATING & STORAGE TEMPERATURE: -30ºC to 95ºC
Materials
HOUSING & BUSHING: 6/6 nylon (UL 94V-2).
ACTUATOR: 6/6 nylon (UL 94V-2).
CONTACTS & TERMINALS: Q contact material: Copper, silver plated.
See page K-20 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
MOUNTING NUT: Steel, zinc plated.
TERMINAL SEAL: Epoxy
.
NOTE: Any models supplied with Q or B contact material ar
e RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Custome Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-19 and K-20. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
R100
SP, 36° Index, 10 pos. no stops
R103 SP, 36° Index, 3 pos.
R104 SP, 36° Index, 4 pos.
R108 SP, 36° Index, 8 pos.
R203 DP
,
36° Index, 3 pos.
R204 DP, 36° Index, 4 pos.
R205 DP, 36° Index, 5 pos.
Terminations
03
Solder lug with hole
01 Solder lug with notch
02 PC Thru-hole
WC Wire Lead
Seal
NONE
No seal
E Epoxy seal
Contact Material
Q
Silver
B Gold
Actuator
07
.500" high with .156" flat
05 .375" high with .156" flat
15 Screwdriver slot without bushing
Mounting Style
RR
3/8-32 threaded bushing
RN PC without bushing
RS PC without bushing
K–19
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
K
Rotary
Third Angle
Projection
R Series
ROTA-SLIDE
®
Rotary Switches
SWITCH FUNCTION
ACTUATOR
DP MODELS 36º INDEXING
SCHEMA
TIC
SP
MODELS 36º INDEXING
SCHEMATIC
15
SCREWDRIVER SLOT
07
.500
" HIGH WITH .156" FLA
T
05
.375"
HIGH WITH .156" FLA
T
NOTE: Break-before-make contacts. Actuators and contacts are shown in position 1.
No common terminal is present. Switching function is provided by movable contacts
shorting adjacent pairs of stationary contacts.
Part number show: R10007RR03Q
Shown with ‘RR’ mounting style.
For mounting styles without bushing,
add .250 (6,35) to actuator length.
Shown with ‘RN’ mounting style. Arrow on actuator marked red (std.).
Shown with ‘RS’ mounting style.
All Terminals5 Position
R205
All T
erminals4 Position
R204
10-1-2-3,5-6-7-83 Position
R203
DP
TERMINALS
SWITCH
FUNCTION
MODEL
NO.
NO.
POLES
DP
MODELS 36º INDEXING
All models with all options when
ordered with ‘Q’ contact material.
10-1-2-3-44 Position
R104
10-1-2-33 Position
R103
All Terminals
10 Position
No Stops
R100
SP
TERMIN
ALS
SWITCH
FUNCTION
MODEL
NO.
NO.
POLES
S
PMODELS 36º INDEXING
10-1-2-3-4-5
-6-7-88 Position
R108
Third Angle
Projection
R Series
ROTA-SLIDE
®
Rotary Switches
MOUNTING STYLE
TERMINATIONS
CONTACT MATERIAL
SEAL
P
ANEL MOUNTING
PC MOUNTING
NONE
NO SEAL
E
EPOXY SEAL
03
SOLDER LUG WITH HOLE
02
PC THRU-HOLE
WC
WIRE
LEAD
01
SOLDER LUG WITH NOTCH
RS
PC SCREWDRIVER SLOT WITHOUT BUSHING
RR
3/8-32 THREADED BUSHING
RN
PC WITHOUT BUSHING
Mounting nut included (part number 175000100).
Position numbers and characters
are molded on housing.
* Note: See T
echnical Data section of this catalog for RoHS compliant and compatible definition and specifications.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated. (Standard with all
termination options.)
All models with all options when ordered with ‘Q’ contact material.
NOTE: Any models supplied with Q, B or G contact material ar
e RoHS compliant.
6.00
(152,4)
.50
(12,7)
22 AWG
INSULATED
WIRE
K
Rotary
K–
20
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com

R20307RR02Q

Mfr. #:
Manufacturer:
C&K Switches
Description:
Rotary Switches Rotary
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union