PCS1P2860A
Rev. 1 | Page 3 of 6 | www.onsemi.com
Absolute Maximum Ratings
Symbol Parameter Rating Unit
VDD Power Supply Voltage relative to Ground -0.5 to +4.6
V
V
IN
Input Voltage relative to Ground (Input Pins) -0.5 to VDD+0.3
T
STG
Storage temperature -65 to +150 °C
T
s
Max. Soldering Temperature (10 sec) 260 °C
T
J
Junction Temperature 125 °C
T
DV
Static Discharge Voltage
(As per JEDEC STD22- A114-B)
2 KV
Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect
device reliability.
Operating Conditions
Parameter Description Min Typ Max Unit
VDD / AVDD
Operating Voltage 3.135 3.3 3.465 V
T
Operating Temperature (Ambient Temperature) 0 70 °C
C
Load Capacitance 15 pF
C
Input Capacitance 5 pF
DC Electrical Characteristics
Symbol Parameter Conditions Min Typ Max Units
VDD / AVDD Operating Voltage
3.135 3.3 3.465 V
VIH Input High Voltage 2.2 VDD+0.3 V
VIL Input Low Voltage GND-0.3 1.0 V
IIH Input HIGH current VIN = VDD
30 µA
IIL Input LOW current VIN = GND
50 µA
VOH Output High Voltage VDD = 3.135, IOH = -12mA 2.4
V
VOL Output Low Voltage VDD = 3.135, IOL = 12mA
0.4 V
IOZ Output Leakage Current Three-state outputs
10 µA
ICC Static Current
CLKIN and SHUTDOWNB
Pins pulled low
5.5 mA
IDD Dynamic Current No Load, All Clocks on
35
mA
ZOUT Nominal output impedance
30
Ω