DATA SHEET
Product specification
Supersedes data of 1996 Aug 19
File under Integrated Circuits, IC12
1997 Apr 02
INTEGRATED CIRCUITS
PCA8581; PCA8581C
128 × 8-bit EEPROM with I
2
C-bus
interface
1997 Apr 02 2
Philips Semiconductors Product specification
128 × 8-bit EEPROM with I
2
C-bus interface
PCA8581; PCA8581C
CONTENTS
1 FEATURES
2 GENERAL DESCRIPTION
3 QUICK REFERENCE DATA
4 ORDERING INFORMATION
5 BLOCK DIAGRAM
6 PINNING
7 CHARACTERISTICS OF THE I
2
C-BUS
7.1 Bit transfer
7.2 Start and stop conditions
7.3 System configuration
7.4 Acknowledge
7.5 I
2
C-bus protocol
8 LIMITING VALUES
9 HANDLING
10 DC CHARACTERISTICS
11 AC CHARACTERISTICS
12 APPLICATION INFORMATION
12.2 Application example
12.2 Slave address
12.3 Diode protection
13 PACKAGE OUTLINES
14 SOLDERING
14.1 Introduction
14.2 DIP
14.2.1 Soldering by dipping or by wave
14.2.2 Repairing soldered joints
14.3 SO
14.3.1 Reflow soldering
14.3.2 Wave soldering
14.3.3 Repairing soldered joints
15 DEFINITIONS
16 LIFE SUPPORT APPLICATIONS
17 PURCHASE OF PHILIPS I
2
C COMPONENTS
1997 Apr 02 3
Philips Semiconductors Product specification
128 × 8-bit EEPROM with I
2
C-bus interface
PCA8581; PCA8581C
1 FEATURES
Operating supply voltage:
4.5 to 5.5 V (PCA8581)
2.5 to 6.0 V (PCA8581C)
Integrated voltage multiplier and timer for writing
(no external components required)
Automatic erase before write
Low standby current; maximum 10 µA
8-byte page write mode
Serial input/output bus (I
2
C-bus)
Address by 3 hardware address pins
Automatic word address incrementing
Designed for minimum 10000 write cycles per byte
10 years minimum non-volatile data retention
Infinite number of read cycles
Pin and address compatibility to PCF8570C and
PCF8582
Operating ambient temperature: 25 to +85 °C.
2 GENERAL DESCRIPTION
The PCA8581 and PCA8581C are low power CMOS
EEPROMs with standard and wide operating voltages:
4.5 to 5.5 V (PCA8581)
2.5 to 6.0 V (PCA8581C).
In the following text, the generic term ‘PCA8581’ is used to
refer to both types in all packages except when otherwise
specified.
The PCA8581 is organized as 128 words of 8-bytes.
Addresses and data are transferred serially via a two-line
bidirectional bus (I
2
C-bus). The built-in word address
register is incremented automatically after each written or
read data byte. All bytes can be read in a single operation.
Up to 8 bytes can be written in one operation, reducing the
total write time per byte. Three address pins, A0, A1 and
A2 are used to define the hardware address, allowing the
use of up to 8 devices connected to the bus without
additional hardware.
3 QUICK REFERENCE DATA
4 ORDERING INFORMATION
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
DD
supply voltage
PCA8581 4.5 5.5 V
PCA8581C 2.5 6.0 V
I
DD
supply current (standby) f
SCL
= 0 Hz 10 µA
T
amb
operating ambient temperature 25 +85 °C
T
stg
storage temperature without EEPROM retention 65 +150 °C
with EEPROM retention 65 +85 °C
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
PCA8581P DIP8 plastic dual in-line package; 8 leads (300 mil) SOT97-1
PCA8581CP DIP8 plastic dual in-line package; 8 leads (300 mil) SOT97-1
PCA8581T SO8 plastic small outline package; 8 leads; body width 3.9 mm SOT96-1
PCA8581CT SO8 plastic small outline package; 8 leads; body width 3.9 mm SOT96-1

PCA8581CT/6,118

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
IC EEPROM 1K I2C 100KHZ 8SO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union