For further information contact your local STMicroelectronics sales
office
Evaluation board for IO-Link transceiver device L6362A
Features
Operating voltage from 7 to 36 V
Operating current up to 300 mA
Configurable in push-pull, high-side or low-
side
Overcurrent protection with cutoff function
Overtemperature protection
Suitable to drive R, L and C loads
Delayed cutoff for quick charging of
capacitive loads
Able to handle up to 500 mJ inductive loads
Full reverse polarity protection on V
CC
, GND,
OUTH, OUTL and I/Q pins
Green device status LED (ON or OFF)
Red diagnostic LEDs for:
cutoff and overtemperature events
overload
Supports COM1, COM2 and COM3
Meets IEC 61000-4-4 (burst), IEC 61000-4-2
(ESD) and EN60947-5-2/IEC 61000-4-5
(surge) requirements
RoHS compliant
Description
The STEVAL-IFP017V3 is an evaluation board
designed to analyze the features of L6362A,
including fast demagnetization, reverse polarity,
overload, overtemperature, ground and supply
open wire protections.
The highly robust design of the L6362A allows
the STEVAL-IFP017V3 to meet IEC 61000-4-4
(burst), IEC 61000-4-2 (ESD) and EN60947-5-
2/IEC 61000-4-5 (surge) without additional
external components.
The STEVAL-IFP017V3 offers dedicated input
and output screw connectors to facilitate easy
and flexible connections for user requirements.
The on-board red and green LEDs signal the IC
status.
On the STEVAL-IFP017V3, the exposed pad of
the L6362A is connected to an electrically floating
copper area which acts as a heatsink.
