OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2701235

P1-P3P4-P6
https://www.phoenixcontact.com/pi/products/2701235
08/19/2018Page1/6
I/O module-AXL F RTD8 XC 1F-2701235
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Axioline F XC, Temperature recording module, Analog inputs: 8 (for resistance temperature
detectors), connection method: 2, 3, 4-wire (shielded), transmission speed in the local bus: 100 Mbps,
Extremeconditions version, including bus base module and AxiolineF connectors
The figure shows the standard item
Product Description
The module is designed for use within an AxiolineF station.
It is used to acquire signals from resistive temperature sensors.
The module supports all common platinum and nickel sensors according to DINEN60751 and SAMA.
Cu10, Cu50, Cu53 sensors as well as various KTY8x sensor types are also supported.
Why buy this product
8 analog input channels for the connection of resistance temperature detectors (RTD)
500 Ω and 5 kΩ linear inputs
Connection of sensors in 2, 3, and 4-wire technology
Integrated, digital sensor linearization
Standardized measured value representation directly in °C, °F or Ω
Measured value display in 16-bit format or floating point format
Programmable filters
Short-circuit protected inputs
Device rating plate stored
Diagnostic and status indicators
Can be used under extreme ambient conditions
Extended temperature range of -40°C ... +70°C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
Partially coated PCBs
Temperature stability
Very high level of noise immunity
Low noise emission
Installation monitoring by means of “Channel scout” function
Key Commercial Data
Packing unit 1 STK
GTIN
https://www.phoenixcontact.com/pi/products/2701235
08/19/2018Page2/6
I/O module-AXL F RTD8 XC 1F-2701235
GTIN 4046356730471
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Caption Dimensional drawing
Width 53.6 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions
The depth is valid when a TH35-7,5 DIN rail is used (according to
EN60715).
Ambient conditions
Ambient temperature (operation) -25 °C ... 60 °C (Standard)
-40 °C ... 70 °C (Extended, see section “Tested successfully: use under
extreme ambient conditions” in the data sheet.)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level)
Degree of protection IP20
General
Mounting type DIN rail
Net weight 215 g
Note on weight specifications with connectors and bus base module
Interfaces
Designation AxiolineFlocal bus
No. of channels 2
Connection method Bus base module
Transmission speed 100 Mbps
Axioline potentials
Designation
AxiolineF local bus supply (U
Bus
)
Supply voltage 5 V DC (via bus base module)
Current consumption typ. 115 mA
max. 180 mA
Power consumption typ. 0.58 W
max. 0.9 W
Designation
Supply for analog modules (U
A
)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
https://www.phoenixcontact.com/pi/products/2701235
08/19/2018Page3/6
I/O module-AXL F RTD8 XC 1F-2701235
Technical data
Axioline potentials
Current consumption typ. 15 mA
max. 25 mA
Power consumption max. 0.6 W
typ. 0.94 W (at U
Bus
and U
A
)
max. 1.5 W (at U
Bus
and U
A
)
Type of protection Surge protection of the supply voltage
Polarity reversal protection of the supply voltage
Transient protection
Analog inputs
Number of inputs 8 (for resistance temperature detectors)
Input name Analog inputs
Description of the input Inputs for resistive temperature sensors
Connection method Push-in connection
Connection technology 2, 3, 4-wire (shielded)
Sensor types (RTD) that can be used Pt, Ni, KTY, Cu sensors
Linear resistance measuring range 0 Ω ... 500 Ω
0 kΩ ... 5 kΩ
Nominal value of the current sources
1 mA (Pt 100, Ni 100, R
Lin
500 Ω; pulse current, the specification is valid
during the sampling phase)
Measured value representation 16 bits (15 bits + sign bit)
Resolution A/D 24 bit
Type of protection Short-circuit protection, overload protection of the inputs
Transient protection of inputs
Transient protection of sensor supplies
Data formats IB IL, S7-compatible
Input filter time 40 ms
Electrical isolation
Test section
5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1
min.
5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min.
Standards and Regulations
Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g
Shock in acc. with EN60068-2-27/IEC60068-2-27 30g
Continuous shock according to EN60068-2-27/IEC60068-2-27 10g
Protection class III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
P1-P3P4-P6

2701235

Mfr. #:
Buy 2701235
Manufacturer:
Phoenix Contact
Description:
I/O Modules AXL F RTD8 XC 1F
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet