D6D0503N

D
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.5 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,500 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3.5 milliohms.
Insulation Resistance: Diallyl in excess of 900,000 megohms
Glass in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
DIALLYL PHTHALATE INSULATION
SWITCHES - 30° INDEX - ADJUSTABLE STOPS - SOLDER LUG TERMINALS
SPECIFICATIONS AND ORDERING INFORMATION
D6 - SERIES
1.687" DIAMETER 1.5 AMPS @ 28 VDC
The D6 Series is one of our more versatile rotary switches. A 30° index
angle, solder lug terminals, and diallyl phthalate insulation are
standard. However, additional indexes of 36°, 45°, and 60° and insulation
sections of glass epoxy and ceramic are available. Adjustable stops are
available on indexes of 30° and 60°.
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials
as standard.
Clips and Rotors: Brass with silver plate as standard.
Insulation: Diallyl phthalate, glass, or ceramic.
Index: Dual-ball, side thrust design.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 36° , 45°, and 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
STANDARD CONSTRUCTION D6D - DIALLYL PHTHALATE CONSTRUCTION
28
UNIT OF ELECTRO SWITCH CORP.
ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
01 02-12 1 1 D6D0112S D6D0112N DD 05 02-03 5 1 D6D0503S D6D0503N DR
02 02-12 1 2 D6D0212S D6D0212N DD 06 02-12 1 6 D6D0612S D6D0612N DD
02 02-06 2 1 D6D0206S D6D0206N DL 06 02-06 2 3 D6D0606S D6D0606N DL
03 02-12 1 3 D6D0312S D6D0312N DD 06 02-05 3 2 D6D0605S D6D0605N DO
03 02-05 3 1 D6D0305S D6D0305N DO 08 02-06 2 4 D6D0806S D6D0806N DL
04 02-12 1 4 D6D0412S D6D0412N DD 09 02-05 3 3 D6D0905S D6D0905N DO
04 02-06 2 2 D6D0406S D6D0406N DL 10 02-03 5 2 D6D1003S D6D1003N DR
05 02-12 1 5 D6D0512S D6D0512N DD 10 02-06 2 5 D6D1006S D6D1006N DL
.437
D
SHAFT AS VIEWED
WITH NON-TURN LUG
AT 9 O'CLOCK AND
SHAFT IN EXTREME
CCW POSITION AND
STRUT BOLTS
ORIENTED VERTICALLY.
SHAFT
,
BUSHING
,
AND
FLAT
OPTIONS
PRINTED
BOARD
MOUNTING
PATTERN
U
W
Z
INSULATION
OPTIONS
D6G - GLASS EPOXY INSULATION REAR P.C. D6C - CERAMIC CONSTRUCTION
ADDITIONAL OPTIONS AND ORDERING INFORMATION
D6 - SERIES
CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS.
UNIT OF ELECTRO SWITCH CORP.
ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
29
D6
CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS
(SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY)
ADDITIONAL OPTIONS
Y
R
2 DIGIT INSULATION TOTAL ACTIVE CONTACT
SERIES TYPE POLES POSITIONS TYPE
TERMINAL INDEX STOP SHAFT/ SHAFT
TYPE ANGLE TYPE BUSHING FLAT
D6 D - DIALLYL 01 - MIN. 12 - MAX @ 30° S-SHORTING
(30°,45°,60°) 10 - MAX @ 36° N- NON
G - GLASS 08 - MAX@ 45° SHORTING
(30°,36°,45°,60°) 06 - MAX @ 60°
D6 C - CERAMIC 01 - MIN. 12 - MAX @ 30° S-SHORTING
(30°,60°) 06 - MAX @ 60° N- NON
SHORTING
L - SOLDER LUG 30° A-ADJ.
R - REAR P.C. 36°
(30°,60° ONLY)
45° F-FIXED
60° C- CONT. SEE SEE
CHART CHART
L - SOLDER LUG 30° A-ADJ. “A” “B”
60° F-FIXED
C- CONT.
How to Order Additional Options:
(NO 36°)

D6D0503N

Mfr. #:
Manufacturer:
Electroswitch
Description:
Rotary Switches
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union