2SP0320T2C0-12

2SP0320T2Cx-12
Preliminary Data Sheet
www.IGBT-Driver.com Page 7
Assembly Drawing
Fig. 1: Assembly drawing of 2SP0320 with highlighted gate resistors
Note that the wires of the gate resistors should not project more than 1.6mm after soldering (excess length at
bottom side). Furthermore, a minimum distance of 1mm must be maintained between the gate resistor body
and the PCB.
Legal Disclaimer
This data sheet specifies devices but cannot promise to deliver any specific characteristics. No warranty or
guarantee is given either expressly or implicitly regarding delivery, performance or suitability.
CT-Concept Technologie GmbH reserves the right to make modifications to its technical data and product
specifications at any time without prior notice. The general terms and conditions of delivery of CT-Concept
Technologie GmbH apply.
2SP0320T2Cx-12
Preliminary Data Sheet
www.IGBT-Driver.com Page 8
Ordering Information
The general terms and conditions of delivery of CT-Concept Technologie GmbH apply.
CONCEPT Driver Type # Related IGBT
2SP0320T2C0-12 (Only 15V logic supported) 1200V IGBT modules
Product home page: www.IGBT-Driver.com/go/2SP0320
Refer to www.IGBT-Driver.com/go/nomenclature
for information on driver nomenclature
Information about Other Products
For other drivers, evaluation systems product documentation and application support
Please click: www.IGBT-Driver.com
Manufacturer
CT-Concept Technologie GmbH
A Power Integrations Company
Johann-Renfer-Strasse 15
2504 Biel-Bienne
Switzerland
Phone +41 - 32 - 344 47 47
Fax +41 - 32 - 344 47 40
E-mail Info@IGBT-Driver.com
Internet www.IGBT-Driver.com
© 2008…2014 CT-Concept Technologie GmbH - Switzerland. All rights reserved.
We reserve the right to make any technical modifications without prior notice. Version 2.0 from 2016-05-20

2SP0320T2C0-12

Mfr. #:
Manufacturer:
Power Integrations
Description:
IC DUAL GATE DRIVER 20A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet