ST7FLITEU09U6TR

March 2002 1/6
This ispreliminary information on a new product now in development or undergoing evaluation. Details are subject tochange without notice.
Rev. 2.1
ST7FLITE0
8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY,
DATA EEPROM, ADC, TIMERS, SPI
DATA BRIEFING
Memories
1.5K bytes single voltage Flash Program
memory with read-out protection, In-Circuit
Programming and In-Application Program-
ming (ICP and IAP). 10K write/erase cycles
guaranteed
128 bytes RAM
128 bytes data EEPROM with read-out pro-
tection. 300K write/erase cycles guaranteed
Clock, Reset and Supply Management
3-level low voltage supervisor (LVD) and aux-
iliary voltage detector (AVD) for safe power-
on/off procedures
Clock sources: internal 1MHz RC 1% oscilla-
tor or external clock
Optional PLL x4 or x8 for 4 or 8 MHz internal
clock
Four Power Saving Modes: Halt, Active-Halt,
Wait and Slow
Interrupt Management
10 interrupt vectors plus TRAP and RESET
4 external interrupt lines (on 4 vectors)
I/O Ports
13 multifunctional bidirectional I/O lines
9 alternate function lines
6 high sink outputs
2 Timers
One 8-bit Lite Timer with prescaler including:
watchdog, 1 realtime base and 1 input cap-
ture.
One 12-bit Auto-reload Timer with output
compare function and PWM
1 Communication Interface
SPI synchronous serial interface
A/D Converter
8-bit resolution for 0 to V
DD
Fixed gain Op-amp for 11-bit resolution in 0 to
250 mV range (@ 5V V
DD
)
5 input channels
Instruction Set
8-bit data manipulation
63 basic instructions
17 main addressing modes
8 x 8 unsigned multiply instruction
True bit manipulation
Development Tools
Full hardware/softwaredevelopment package
Device Summary
DIP16
SO16
150”
Features ST7FLite09 ST7FLite05
Program memory - bytes 1.5K Flash 1.5K Flash
RAM (stack) - bytes 128 (64) 128 (64)
Data EEPROM - bytes 128 -
Peripherals Lite Timer w/ Watchdog, Autoreload Timer w/ 1 PWM, SPI, 8-bit ADC w/ Op-Amp
Operating Supply 2.4V to 5.5V
CPU Frequency 1MHz RC 1% + PLLx4/8MHz
Operating Temperature -40°C to +85°C
Packages SO16 150”, DIP16 SO16 150”, DIP16
1
ST7FLITE0
2/6
1 INTRODUCTION
The ST7FLITE0 is a member of the ST7 microcon-
troller family. All ST7 devices are based on a com-
mon industry-standard 8-bit core, featuring an en-
hanced instruction set.
The ST7FLITE0 features FLASH memory with
byte-by-byte In-Circuit Programming (ICP) and In-
Application Programming (IAP) capability.
Under software control, the ST7FLITE0 device
can be placed in WAIT, SLOW, or HALT mode, re-
ducing power consumption when the application is
in idle or standby state.
The enhanced instruction set and addressing
modes ofthe ST7 offer both power and flexibility to
software developers, enabling the design of highly
efficient and compact application code. In addition
to standard 8-bit data management, all ST7 micro-
controllers feature true bit manipulation, 8x8 un-
signed multiplication and indirect addressing
modes.
Figure 1. General Block Diagram
8-BIT CORE
ALU
ADDRESS AND DATA BUS
RESET
PORT B
PORT A
SPI
8-BIT ADC
w/ WATCHDOG
PB4:0
(5 bits)
1 MHz. RC OSC
Internal
CLOCK
CONTROL
RAM
(128 Bytes)
PA7:0
(8 bits)
V
SS
V
DD
POWER
SUPPLY
FLASH
(1.5K Bytes)
LVD/AVD
+
PLL x 4 or x 8
LITE TIMER
MEMORY
DATA EEPROM
(128 Bytes)
12-BIT AUTO-
RELOAD TIMER
1
ST7FLITE0
3/6
2 PIN DESCRIPTION
Figure 2. 16-Pin Package Pinout (150mil)
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
V
SS
V
DD
SS/AIN0/PB0
CLKIN/AIN4/PB4
MOSI/AIN3/PB3
MISO/AIN2/PB2
SCK/AIN1/PB1
RESET
PA0 (HS)/LTIC
PA1 (HS)
PA7
PA6/MCO/ICCCLK
PA5 (HS)/ICCDATA
PA4 (HS)
PA3 (HS)
PA2 (HS)/ATPWM0
ei1
ei0
(HS) 20mA high sink capability
ei
x
associated external interrupt vector
ei2
ei3
1

ST7FLITEU09U6TR

Mfr. #:
Manufacturer:
STMicroelectronics
Description:
8-bit Microcontrollers - MCU 8 BITS MICROCONTR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union