https://www.phoenixcontact.com/pi/products/3071355
04/29/2017Page2/3
Trunk line branch terminal-UDB 2X25/16 GY-3071355
Technical data
General
Nominal current I
N
101 A
Nominal voltage U
N
400 V (Max. 1000V)
Open side panel No
Dimensions
Width 23 mm
Length 46 mm
Height NS 35/7,5 42 mm
Height NS 35/15 49.5 mm
Connection data
Connection method Screw connection
Connection in acc. with standard IEC 60998-1
Note Use ferrules for stranded conductors
Conductor cross section solid min. 1.5 mm²
Conductor cross section solid max. 25 mm²
Conductor cross section AWG min. 8
Conductor cross section AWG max. 2
Conductor cross section flexible min. 10 mm²
Conductor cross section flexible max. 25 mm²
Min. AWG conductor cross section, flexible 8
Max. AWG conductor cross section, flexible 3
Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm²
Stripping length 16 mm
Screw thread M5/M6
Tightening torque max 2.5 Nm
Connection method Screw connection
Connection in acc. with standard IEC 60998-1
Conductor cross section solid min. 1.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
Stripping length 16 mm
Standards and Regulations
Connection in acc. with standard IEC 60998-1
IEC 60998-1
