GCD-SE Series – Single Ended DC Gage Heads
GCD-SE Series Gage Heads Rev. 7 www.meas-spec.com 2015-July
4/4
ORDERING INFORMATION
OPTIONS
Air extend/spring retract gage head (Consult factory)
ACCESSORIES
Cable with wired mating connector (1)
GCD-SE to Stripped & Tinned
Replacement contact tips
(1) Cables are shielded, 10 foot long, and rated 80°C [176°F] operating. Consult factory for other lengths.
Refer to our
“Options and Accessories for Gage Head” data sheet.
TECHNICAL CONTACT INFORMATION
Measurement Specialties, Inc.
1000 Lucas Way
Hampton, VA 23666
United States
Phone: +1-800-745-8008
Fax: +1-757-766-4297
Email:
sales@meas-spec.com
Web:
www.meas-spec.com
MEAS Deutschland GmbH
Hauert 13
D-44227 Dortmund
Germany
Phone: +49-(0)231-9740-0
Fax: +49-(0)231-9740-20
Email:
info.de@meas-spec.com
Web:
www.meas-spec.com
Measurement Specialties China Ltd.
No. 26, Langshan Road
High-tech Park (North)
Nanshan District, Shenzhen 518057
China
Phone: +86-755-33305088
Fax: +86-755-33305099
Email:
info.cn@meas-spec.com
Web:
www.meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
