ADM488/ADM489
Rev. D | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
CC
7 V
Inputs
Driver Input (DI) −0.3 V to V
CC
+ 0.3 V
Control Inputs (DE, RE)
−0.3 V to V
CC
+ 0.3 V
Receiver Inputs (A, B) −14 V to +14 V
Outputs
Driver Outputs −14 V to +12.5 V
Receiver Output −0.5 V to V
CC
+ 0.5 V
Power Dissipation 8-Lead PDIP 700 mW
θ
JA
, Thermal Impedance 120°C/W
Power Dissipation 8-Lead SOIC 520 mW
θ
JA
, Thermal Impedance 110°C/W
Power Dissipation 14-Lead PDIP 800 mW
θ
JA
, Thermal Impedance 140°C/W
Power Dissipation 14-Lead SOIC 800 mW
θ
JA
, Thermal Impedance 120°C/W
Power Dissipation 16-Lead TSSOP 800 mW
θ
JA
, Thermal Impedance 150°C/W
Operating Temperature Range
Industrial (A Version) −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Lead Temperature (Soldering, 10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
ESD Association S5.1 HBM Standard 3 kV
EFT Rating, IEC1000-4-4 2 kV
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.