126
021717
PRODUCT CATEGORY 2, 3 (TEMPERATURE RANGE -55°C TO +105°C)
TEST Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance
ΔC/C
within +10/-20% of initial value for Vr ≤ 16V
within ±20% of initial value for Vr ≥ 20V
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 1.25 x initial limit
Storage Life
105ºC, 0V, 2000h
ΔC/C
within +10/-20% of initial value for Vr ≤ 16V
within ±20% of initial value for Vr ≥ 20V
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 3 x initial limit
Humidity ΔC/C within +30/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +105ºC +20ºC
Temperature DCL
IL* n/a IL* 10 x IL* 12.5 x IL* IL*
Stability ΔC/C
n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
DF
IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
Visual examination no visible damage
Surge
DCL initial limit
Voltage
ΔC/C
within +10/-20% of initial value for Vr ≤ 16V
within +20/-30% of initial value for Vr ≥ 20V
DF 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours at
room temperature. Also determine after application of
105ºC temperature, category voltage for 2000 +48/-0
hours and then leaving 1-2 hours at room tempera-
ture. Power supply impedance to be ≤ 0.1Ω/V.
Determine after storage without applied voltage
at 65±2ºC and 95±2% relative humidity for 500
hours and then recovery 1-2 hours at room
temperature.
Test temperature: 105ºC+3/0ºC
Test voltage: Category voltage at 105ºC
Surge voltage: 1.3 x category voltage at 105ºC
Series protection resistance 1000±100Ω
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +105+3/-0 15
6 +20±2 15
TEST Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance
ΔC/C
within +10/-20% of initial value for Vr ≤ 16V
within ±20% of initial value for Vr ≥ 20V
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 1.25 x initial limit
Storage Life
85ºC, 0V, 2000h
ΔC/C
within +10/-20% of initial value for Vr ≤ 16V
within ±20% of initial value for Vr ≥ 20V
DF 1.5 x initial limit
ESR 2 x initial limit
Visual examination no visible damage
DCL 5 x initial limit
Humidity ΔC/C within +40/-20% of initial value
DF 1.5 x initial limit
ESR 2 x initial limit
+20ºC -55ºC +20ºC +85ºC +20ºC
Temperature DCL
IL* n/a IL* 10 x IL* IL*
Stability ΔC/C
n/a +0/-20% ±5% +20/-0% ±5%
DF
IL* 1.5 x IL* IL* 1.5 x IL* IL*
Visual examination no visible damage
Surge
DCL initial limit
Voltage
ΔC/C
within +10/-20% of initial value for Vr ≤ 16V
within +20/-30% of initial value for Vr ≥ 20V
DF 1.25 x initial limit
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours
at room temperature. Power supply impedance to be
≤0.1Ω/V.
Determine after storage without applied
voltage at 65±2ºC and 95±2% relative
humidity for 500 hours and then recovery
1-2 hours at room temperature.
Test temperature: 85+3/0ºC
Test voltage: Rated voltage
Surge voltage: 1.3 x rated voltage
Series protection resistance 1000±100Ω.
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +20±2 15
J-CAP
TM
Series
Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors
PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55°C TO +85°C)
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
