5kW Single-Phase ATS/Metered PDU, 208/240V
Outlets (16 C13, 2 C19 & 1 L6-30R) 2 L6-30P 10ft
inputs, 2U Rack-Mount, TAA
MODEL NUMBER: PDUMH30HVAT
Description
Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded
network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power
sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input
cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the
secondary power source until the primary input is restored and stable. Highly reliable solid-state switching
between primary and secondary inputs occurs in 1-5 milliseconds. ATS functionality is supported by any
two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant
power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a
single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system.
In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with
zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a
two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even
separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power
quality on both input sources to prevent transfer to the secondary source when unavailable or of lower
quality than the primary source. Front input LED's display primary or secondary power availability.
Features
208/240V 30A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 24A continuous)
●
ATS features provide redundant power for critical network equipment with a single input power cord
●
Digital display with selection button reports voltage, amperage and kilowatt loading information in four
output segments (Segment 1: 8 C13 & 1 C19 outlets / Segment 2: 8 C13 & 1 C19 outlets / Segment 3:
L6-30R outlet / Segment 4: total output of all outlets combined)
●
19 built-in outlets (16 C13, 2 C19, 1 L6-30R)
●
Highlights
Single phase 30A 208/240V
Auto Transfer Switch / ATS
Metered PDU with Solid State
Switching
●
Enables redundant-power
configurations for single-corded
network devices
●
Separate primary & secondary
inputs connect to any two
compatible power sources
●
2U horizontal rackmount; 2 L6-
30P inputs; 19 outlets (16 C13,
2 C19, 1 L6-30R)
●
Front panel digital display with
LED indicators reports output
amps in 4 loading segments,
plus total kW and input voltage
●
Trade Agreements Act / TAA
Compliant for GSA Schedule
purchases
●
Package Includes
Auto Transfer Switch PDU
●
Rackmount installation brackets
●
Installable plug-retention
shelves & cable ties
●
1 / 4
