19
• 130 James Way, Southampton, PA 18966 - 3838 • Telephone: (215) 355-7080 • Fax: (215) 355-1088 • www.cwind.com
D-Subminiature Connectors
D-Subminiature Features
• 9-, 15-, 25-, 37- pin or socket versions available
• Interchangeable and mateable with other D’s
• UL, CSA listed
• Patented 0.050/0.054 in. (1.27/1.38mm) cable/connector
transition
• Fully mating, precisely positioned contacts
• Patented off-set contact tines assure gas-tight connection
• Rugged, lightweight UL 94 V-O thermoplastic construction
• No exposed metal
• Positive polarization via D-shaped contact shroud
• All contacts numbered
• Accepts 28 AWG solid or stranded and 30 AWG solid
conductors in both shielded and unshielded flat cables
• Positive, fast termination. No special assembly tooling
required
• Simple, non-destructive removal of covers
• Three strain relief options available
• Easily daisy chained
• Hardware for a variety of mounting methods available
• Jackscrew design (CWN-HK-01) accepts a standard
miniature banana plug for grounding
• Manufactured under U.S. patent 3,990,767.
Con tact
• Offset, tine design
produces Torq-Tite™
termination for added
reliability
• Contact tines are firmly
connected to the body of
the contact
• Three transition angles
allow mating pins to be
parallel to each other and
seated at equivalent
depths in the insulator
• Patented transition
design eliminates
internal stress on contact
as .050 in. cable centers
are translated to .054 in.
D-Subminiature centers
• Bifurcated barrel
contact provides for
redundant contact with
mating pin
• Rounded tip provides
lead-in for mating with
socket contact
Patented Contact Transition
The CW contact transition is unique in that all contacts are precisely
positioned to provide full contact with their mating member at every pin
and socket. CW’s internal transition from .050 in. to .054 in. centers
eliminates the need for special cables or special cable preparation. It
also eliminates the possibility of pin misalignment, and excessive
insertion/withdrawal forces, providing maximum contact integrity,
minimum contact resistance, and long term reliability.
Three-way Strain Relief
CW’s exclusive design allows for three-way strain relief. This feature
offers you a choice of three cable entry/exit options providing maximum
flexibility and system design.
Assembly That’s a Snap
CW supplies a cover factory preassembled to the base, with the cover in
a detented “up” position to allow sufficient space to insert the cable.
There is no need for special cable alignment tooling. Built-in guides in
both the cover and base orient the cable conductors to the connector
contacts.
Removable Cover
CW insulation displacement D-Subminiature connectors permit simple,
non-destructive removal of the cover for maintenance and connector
reuse–the open end of a paper clip and a special groove in the mounting
flange (standard on all CW D’s) is all that is required to remove the cover.
Socket
Contact
Pin
Contact