Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
220
TPA
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
products
(Black dot)
Frequency correction factor for ripple current
●
Lower ESR at Low temperature after endurance
●
Endurance : 125 °C 3000 h (D8 size : 2000 h)
●
Automotive
●
Vibration-proof product is available upon request. (08 mm and larger)
●
RoHS compliant
Features
Speci cations
Surface Mount Type
Series : TP Type : V
High temperature
Lead-Free re ow (suffix : A✽)
Category temperature range
–40 °C to +125 °C
Rated voltage range 10 V.DC to 35 V.DC
Capacitance range 47 µF to 470 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I < 0.01 CV (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Endurance
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours (D8 size : 2000 h).
the capacitors shall meet the limits specifi ed below.
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
ESR after
endurance
(Ω/100kHz)
Size Code
D8 F G
Initial (+20 °C) 0.45 0.2 0.15
After 2000 h (-40 °C) 40 4.5 3.5
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 10 V.DC 220 µF
Marking color : BLACK
Size
code
0D
L A, B H I W P K
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
DimensionsMarking
(Unit : mm)
R. Voltage
(V.DC)
10 16 25 35
Code ACEV
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
Mar. 201602
